A list of the contents of this article:
- 1 、How to distinguish the quality of the packing machine?
- 2 、How to pack beer
- 3 、How are cans bottled?
- 4 、How did you get the beer in the can of beer?
- 5 、I want to make a drink! Start the small factory! How much does it cost to have a can can production line?
- 6 、How much does it cost to fill a production line for beverage filling?
How to distinguish the quality of the packing machine?
The quality of the packing machine depends on the following points:
First, whether it is a professional manufacturer, there are only a few domestic packing machines that do well, such as Shanghai Yuzhuang.
Second, whether there is a sound quality control process
Third, whether there is a perfect after-sales service system
Wait.
The most important thing is to consult a professional manufacturer.
How to pack beer
Most of the domestic beer is packed in plastic cases or cartons.
The plastic box is packed by a boxing machine.
Is to use a vacuum bucket to grab beer from the assembly line and put it in the plastic box below.
The number of 9 bottles is relatively small, and most of them are 12 bottles.
The carton is packed in a carton machine. The carton is a flat surface before packing. After entering the beer bottle, it is folded and packed into a finished product.
Both plastic boxes and cartons are operated automatically.
PVC is still rarely used in China, as if only a few high-end beers such as cans and Budweiser are used.
How are cans bottled?
Three cans are commonly used, such as eight treasures porridge, and there are also two cans, such as Wang Laoji. The bottom of the cans (three-piece cans) is open before loading into the product, that is to say, the product is loaded upside down, and then sealed by the sealing machine, and then sent into the autoclave for sterilization, after sterilization, spray code on the bottom cover (production date, shelf life, etc.), then according to the product requirements to determine whether to add plastic cover, spoon, etc., and finally box, seal the box. That’s it.
Three-piece cans are canned from below (bottom) and then sealed; two-piece cans are canned from the top and then sealed. The three-piece jar is divided into three parts: the top cover, the can body and the bottom cover; the two-piece jar has only the can body and the top cover.
How did you get the beer in the can of beer?
The beer in the can beer is filled into the can by the filling process. This is because the packaging of canned beer is easier to control. The whole automatic canning line is composed of palletizer, can wine sealing machine, sterilizer, packing machine and so on. First of all, the mechanical filling operation is assisted by the computer identification system and digital display instrument, so that the quality of beer will not be affected in the filling process. Next, you need the unloader to find out some possible manufacturing defects in the cans, such as oil, deformation, foreign body, or smell, and strictly remove the unqualified containers from the line. Empty listening with co2 rinse, prepare pressure and then pour wine. As soon as the wine is filled, it will go through pressure relief, bubble breaking, and finally the sealing and capping process.
The empty listening will be tested by liquid before flushing, and clean brewing water will be selected to operate when flushing. The liquid level detection of beer after sterilization is controlled by a filtec gravimeter, which can automatically remove the wine with insufficient liquid level. Beer in the production process will ferment to produce a large amount of carbon dioxide, in the canning and filled with a certain amount of carbon dioxide, this carbon dioxide is sealed in the wine bottle, in a certain pressure, can be more stable state dissolved in the beer.
Therefore, when the beer is opened, the pressure in the bottle drops, the solubility of carbon dioxide in the beer liquid decreases, and it will be released instantly. In this process, the foaming protein wraps up the released carbon dioxide bubbles to form foam floating on the surface of the beer, which is the delicious foam that we can see on the top of the beer.
Canned beer is becoming more and more popular, mainly due to its light weight, convenient transportation, carrying and opening. At the same time, domestic canned beer aluminum has good processability and printing adaptability, and is also suitable for high-speed and continuous automatic production process. Canned beer has excellent sealing performance, clean and hygienic, and can retain the fresh flavor of beer to a large extent within 12 months of shelf life.
I want to make a drink! Start the small factory! How much does it cost to have a can can production line?
Can can filling production line, only screw cover and labeling can? This kind of fully automatic production line is about 100,000 yuan.
It is mainly for the packaging of all kinds of prepared slices and scented tea.
How much does it cost to fill a production line for beverage filling?
Juice production line equipment can be supplied from small to large, divided into the following grades: small 2000 bottles / hour, 4000 bottles / hour, 6000 bottles / hour, 10000 bottles / hour, 15000 bottles / hour, 20000 bottles / hour-36000 bottles / hour.
There are two ways to make fruit juice beverages: one is made from concentrated fruit juice, and the other is made from fresh fruit. The two kinds of production lines are different, the mix of fruit juice, low budget, suitable for the general market, suitable for customers with low investment in the initial stage. Mainly facing the ordinary market.
The other kind of fresh fruit juice is made from the processing of fresh fruit: the investment is relatively large, depending on what the original fruit is made of, the type of the original fruit is different, and the pretreatment process is also different. Customers who do this kind of project need to determine what fruit juice is made into fruit juice.
The main types of fruit juice packaging are carton packaging, cans packaging, plastic bottles (PET bottles), glass bottles and so on. This also requires customers to position themselves according to the market. The price of the equipment varies with different configurations. For example, 2000 bottles of blended fruit juice drinks, a set of equipment is about 50-700000, according to different requirements, the price is also different.
For small beverage factories, blowing bottles by themselves is not recommended, the investment will be relatively large, and bottles can be purchased at the initial stage.
Factory: generally need more than 1000 square meters of steel structure factory building, the budget is about 300000.
Land: customers choose to build their own factory in the open space, you can also rent the site to reduce the budget.
Formula: it is better for customers to have their own formula, if not, to find a formula manufacturer to develop their own beverage formula.
Equipment: according to your investment budget, it is important to choose the machine and output that are suitable for packaging.
Installation and commissioning: professionals provided by equipment manufacturers are responsible for installation and commissioning to make beverage products.
Products out of the market: good control of the products, and then apply for SC or QS certification, the products can be launched on the market.
This is the end of the introduction of can Packers and beer Packers. Have you found the information you need? If you want to know more about this, remember to collect and follow this site.