The opening of the film of the bagging machine is one of the indispensable equipment in the modern production line. It can automatically cover the plastic film on the product, so as to protect the product from the external environment. However, if not operated properly, opening the film of the bagging machine may also become a disaster on the production line. This paper will discuss the advantages and disadvantages of opening film of bagging machine from three aspects of operation steps, common problems and solutions, and how to use it correctly in the production line.
1. Operation steps
1. Preparation: place the bag on the material rack of the open film of the bagging machine and adjust the length and width of the bag.
two。 Turn on the machine: press the power switch and wait for the machine to start.
3. Adjust parameters: according to the size of the product and the size of the bag, adjust the opening parameters of the bag machine, such as the length, width, speed of the bag, etc.
4. Start bagging: place the product on the workbench where the bagging machine opens the film, press the start button, and the machine starts bagging automatically.
5. Complete bagging: when the machine has finished bagging, remove the product from the workbench and turn off the machine.
Second, common problems and solutions
1. Inaccurate bagging: this may be caused by incorrect length, width, or speed of the bag. The parameters can be adjusted and bagged again.
two。 Bag rupture: this may be due to poor quality of the bag or incorrect length and width of the bag. Good quality bags can be replaced, or parameters can be adjusted to re-bag.
3. Machine failure: this may be caused by damage to the parts of the machine or improper use. You can contact the after-sales service personnel for maintenance or replacement of parts.
Third, the advantages and disadvantages of opening film in bagging machine.
Advantages:
1. A high degree of automation can greatly improve production efficiency.
two。 Accurate bagging can protect the product from the influence of the external environment.
3. It is easy to operate and does not need too much manpower and material resources.
Disadvantages:
1. The cost is high, and a lot of money needs to be invested to buy equipment.
two。 It is difficult to maintain and needs professional technical personnel for maintenance and maintenance.
3. There may be some safety risks, and it is necessary to strictly abide by the operating procedures, otherwise it may cause harm to the personnel.
To sum up, the opening film of the bagging machine plays an important role in the modern production line. The correct use of the bag machine to open the film can greatly improve the production efficiency and protect the products from the influence of the external environment. However, if not operated properly, opening the film of the bagging machine may also become a disaster on the production line. Therefore, when using the bagging machine to open the film, we must strictly abide by the operation rules to ensure the safety and correctness of the operation.