A list of the contents of this article:
- 1 、Similarities and differences between palletizing robot and handling robot
- 2 、What is the working principle of automatic palletizer?
- 3 、What is the brand of palletizing robot?
- 4 、Who can tell me which company of industrial palletizing robots is cheap, practical and good in performance?
- 5 、What’s the difference between welding robot and palletizing robot?
Similarities and differences between palletizing robot and handling robot
I am an application designer of a well-known robot manufacturer in China, and I am familiar with commonly used robots.
I think the two kinds of robots are the same in terms of hardware composition and control mode, specifically, the hardware structure is composed of driver, motor, reducer, control system and so on. Of course, in the number of axes, the palletizing robot is generally four axes. The conventional handling robot is six axes, but the structure of each axis is the same.
The difference is that the palletizing robot belongs to an independent series of industrial robots, and its application is relatively specific. Generally, it can only carry on the plane, and can not rotate in space like the six axes. This form of movement is determined by the number of axes. However, palletizing applications are generally added to the software in palletizing applications, and the palletizing program can be generated automatically through the necessary settings of the application setup wizard.
What is the working principle of automatic palletizer?
A layer of workpieces on the plate that meet the requirements of the pallet, and the plate and the workpiece move forward until the vertical surface of the pallet. The upper stopper rod drops, the other three sides position the stopper bar to start and clamp, and the plate resets at this time. Each workpiece falls to the pallet plane, the pallet plane is 10mm away from the bottom of the plate, and the pallet drops one workpiece height. Repeat the above until the pallet stack meets the set requirements.
What is the brand of palletizing robot?
At present, there are four popular robot brands in the world: ABB of Switzerland, FUNAC of Japan, Kuka of Germany and Buer of Japan.
ABB, headquartered in Switzerland, is the earliest robot company, the early industrial robots are mostly used for welding and assembly, the most famous application example is the welding of automobile parts, but not for too long in the field of palletizing and handling, so although ABB and Kuka have strong overall strength, but in the palletizing field, FANUC is slightly better, or we can say that ABB and Kuka are good at high-precision and low-load operations. FANUC and Buer are good at low-precision and high-load operations.
In addition, there are also some imitation manufacturers in China, which mainly copy the same robots. When the work efficiency is not high, you can also consider the domestic industrial robots.
In fact, the product prices of the four robots are not much different, but only robots are not enough. if you want to palletize, you also need product transmission lines and finishing devices, robot grips, pallet transportation and separation devices, and so on. The cost of these matching devices is likely to reach the price of the robot itself.
Generally speaking, how to choose a palletizing robot should not only consider the price, but also consider whether the scheme design is reasonable, including matching devices, the choice of robot load, and so on.
In addition, I would like to remind you that end-users cannot directly buy the products of these four brands, because they only do robot mainframe, and the supporting devices are not available, that is to say, the robot is actually a “big accessory”. It is the most key accessory of robot palletizer, manufacturing robot and manufacturing robot palletizer are two completely different concepts.
There are many manufacturers of robot palletizers in China, they mainly make robot supporting devices, and then purchase four major brands of robots to assemble into robot palletizers. Our company is such an enterprise, we mainly use ABB and FANUC robots, if you are interested, send me an email [email protected], I will reply to your more detailed robot palletizer information. If you want a robotic palletizer, send the phone directly to my mailbox and I will arrange for someone to contact you!
Who can tell me which company of industrial palletizing robots is cheap, practical and good in performance?
At present, there are four popular robot brands in the world: ABB of Switzerland, FUNAC of Japan, Kuka of Germany and Buer of Japan.
ABB, headquartered in Switzerland, is the earliest robot company, the early industrial robots are mostly used for welding and assembly, the most famous application example is the welding of automobile parts, but not for too long in the field of palletizing and handling, so although ABB and Kuka have strong overall strength, but in the palletizing field, FANUC is slightly better, or we can say that ABB and Kuka are good at high-precision and low-load operations. FANUC and Buer are good at low-precision and high-load operations.
In addition, there are also some imitation manufacturers in China, which mainly copy the same robots. When the work efficiency is not high, you can also consider the domestic industrial robots.
In fact, the product prices of the four robots are not much different, but only robots are not enough. if you want to palletize, you also need product transmission lines and finishing devices, robot grips, pallet transportation and separation devices, and so on. The cost of these matching devices is likely to reach the price of the robot itself.
Generally speaking, how to choose a palletizing robot should not only consider the price, but also consider whether the scheme design is reasonable, including matching devices, the choice of robot load, and so on.
In addition, I would like to remind you that end-users cannot directly buy the products of these four brands, because they only do robot mainframe, and the supporting devices are not available, that is to say, the robot is actually a “big accessory”. It is the most key accessory of robot palletizer, manufacturing robot and manufacturing robot palletizer are two completely different concepts.
There are many manufacturers of robot palletizers in China, they mainly make robot supporting devices, and then purchase four major brands of robots to assemble into robot palletizers. Our company is such an enterprise, we mainly use ABB and FANUC robots, if you are interested, send me an email [email protected], I will reply to your more detailed robot palletizer information. If you want a robotic palletizer, send the phone directly to my mailbox and I will arrange for someone to contact you!
What’s the difference between welding robot and palletizing robot?
What is a welding robot?
Welding robot is an industrial robot engaged in welding (including cutting and spraying). According to the definition of ISO industrial robot terminology standard, welding robot is a kind of multi-purpose and repeatable automatic control manipulator. The welding robot is equipped with welding pliers or welding (cutting) guns on the end shaft flange of the I industry robot, so that it can be welded, cut or thermally sprayed. At present, it has been widely used in automobile manufacturing, automobile chassis, seat frame, guide rail, muffler and hydraulic torque converter welding, especially in automobile chassis welding production.
What is a palletizing robot?
The palletizing robot can meet the requirements of the stacking operation, and can easily stack heavy objects to a set height according to the given stacking type, with a range of up to 3200 mm. Palletizing robot is the product of the organic combination of mechanical and computer programs. It provides higher production efficiency for modern production. Palletizing robot is widely used in medicine, packaging, instrument assembly, relay production and many other industries.
What’s the difference between a welding robot and a palletizing robot?
Welding robot and palletizing robot can be the same, but most of them are different. The welding robot can also palletize when the welding torch is removed and the claw is installed, while the palletizing robot can also weld when the claw is removed and installed with the welding torch.
I believe that after reading the above, you also have a definite understanding of the difference between welding robots and palletizing robots. In fact, these two kinds of robots belong to industrial robots, but welding robots focus more on welding work and palletizing.
Robots focus on palletizing, which is essentially different.
This is the end of the introduction of auto parts palletizer and stacker wholesale. I wonder if you have found the information you need? If you want to know more about this, remember to collect and follow this site.