Mobile:

+86-177 7223 0517

Battery packing (battery packing is prohibited when the battery is packed)

A list of the contents of this article:

How to control the battery packing and packing will not be rare.

Group installation.

1. Be familiar with the packing instructions of the battery before installation.

2. Prepare tool discharge meter, discharge resistance, protective gum gloves, etc.

3. According to sop, there will be no pot packing to control a small number of battery boxes.

653b20f7ad55e

The outer packing box of Tianneng battery is glued to a special purpose in urban area. is it original?

Tell if it’s an original battery.

First of all, we should see whether the outer package of the electric car battery is damaged or there are traces of disassembly, then open the package to see the appearance of the battery, see whether there are marks of abrasion or scratching on the surface, and then see whether there is rust at the metal terminal of the positive and negative electrodes of the battery. The surface of the original battery must be novel.

Secondly, many brands of electric vehicle batteries will be affixed with anti-counterfeiting labels on the butt joint of the battery shell when they leave the factory, so we should pay attention to see if the original battery anti-counterfeiting labels are normal. You can also scrape off the anti-counterfeiting label password coating to verify the authenticity.

Then, it depends on the production date and quality assurance card on the electric car battery. In general, formal electric vehicle battery products will have these two things, especially the quality assurance card is an effective way to solve commodity problems, there is no quality assurance card products must be fake.

Finally, it is suggested that consumers in the process of buying electric vehicle batteries, if they do not want to be deceived and want to buy the original electric vehicle batteries, then they might as well buy them from specialty stores or big brands of electric vehicle battery distribution points, so as to ensure the quality. Later maintenance is also guaranteed.

Can a group of lithium batteries of 48 volts and 20 amperes be loaded into shipping containers?

Sure

A 48V lithium battery is allowed to be carried on board, because according to the relevant provisions of China’s Traffic and Railway Law, the maximum voltage of the battery allowed to be carried on this kind of ship in our country is no more than 450V, so it is allowed to be carried on board, so there is no doubt that 48v lithium battery can be carried on board.

So much for the introduction of battery packing. Thank you for taking the time to read the contents of this site. For more information about battery packing, don’t forget to look it up on this site.

Related Posts
GET IN TOUCH WITH YANMAO
Contact Form Demo (#3)
GET IN TOUCH WITH YANMAO
Contact Form Demo (#3)