A list of the contents of this article:
- 1 、How to connect the PLC control cabinet and how to represent the circuit diagram containing components and components in the cabinet?
- 2 、What is the code drive? is there a picture? Thank you
- 3 、What is the stacking method of blow molded trays?
- 4 、What kind of equipment is needed to produce bottled beer? How much will it cost?
How to connect the PLC control cabinet and how to represent the circuit diagram containing components and components in the cabinet?
The wiring of the PLC control cabinet is shown in the figure:
The input is connected to the external signal input, such as forward, reverse, stop, overload protection.
Output load, such as contactor.
What is the code drive? is there a picture? Thank you
As follows; word=%D3%B2%C5%CCin=12783cl=2cm=1sc=0lm=-1pn=6rn=1di=893456740ln=2000
What is the stacking method of blow molded trays?
Choosing a suitable stacking mode for blow molded pallets can improve the work efficiency and increase the utilization rate of the pallets.
The common stacking methods of blow molded pallets are as follows:
Overlapping type
In the overlapping stacking method, it is suitable for goods of the same shape and size, such as boxes or columns.
Because of the overlapping stacking method, each layer is the same, the goods on the blow molded tray are not related to each other, the goods are prone to loose, and the stability is insufficient.
Therefore, if the product is placed too high, it is necessary to take fixed measures or other appropriate stacking methods.
Although this method has some shortcomings, it is easy to operate and is very suitable for long box products.
Some product packaging can be embedded, but also very suitable for this way of stacking.
Positive and negative interlaced type
Because this method is often used for bagged goods, 5 bags of goods are often placed on the first floor (6 bags of goods can also be placed), so it can also be called “five-flower stack”.
This method is also similar to bricklaying, where the goods on each floor are subjected to mutual force and have excellent stability.
This stacking method is common in warehousing, so that the goods can be placed so that the force on the pallet is uniform.
Many enterprises will stack three-tier goods to make good use of the three-dimensional space of the warehouse.
Crisscross type
This method is generally common in square blow molded pallets.
Its operation is also very simple, and there is mutual force between each layer of goods.
It is a very practical method when using automatic code machine to pile up goods.
Rotating interlaced type
This stacking method, which is shaped like a windmill, is also often used in square pallets.
There is a connection between the goods, and the stability of the stack is also high.
However, there is a gap between the goods, and the utilization rate of the load-bearing surface of the blow molded pallet is not high.
The above methods are the basis of various stacking methods, the overlapping type is more convenient to operate, and the interlaced type is more stable.
We choose the stacking method according to the shape of the goods and pallet shape, choose the appropriate method.
It is not necessarily limited to the above, but also can derive a variety of different stacking methods.
What kind of equipment is needed to produce bottled beer? How much will it cost?
Producing bottled beer costs a lot of money! Beer production consists of three parts: saccharification section, fermentation section and packaging section. Each of these three parts contains its own equipment system, and the saccharification section includes: raw material crushing system, malt saccharification equipment, wort filtration equipment, wort boiling clarification equipment; fermentation section includes: fermentation tank, yeast addition equipment, sake filtration equipment, sake tank Packaging section includes: bottle washing machine, filling machine, sterilizing machine, labeling machine, industrial production should also include unloading box (or palletizer), packing machine (palletizer) and so on.
How much silver does this cost? It’s really hard to calculate. By an estimate, a brewery with an annual output of 100,000 liters needs 40 million to 50 million yuan of equipment alone (in the case of national production). I’m afraid it’s still cheap. This does not include investment in factories and civil construction.
This is the end of the introduction of the code drive. Thank you for taking the time to read the contents of this site. Don’t forget to look for more information about the code drive video and code drive on this site.