A list of the contents of this article:
- 1 、Carton automatic sealing machine tape how to avoid wrinkles?
- 2 、Which is the best automatic sealing machine for adhesive tape?
- 3 、What are the matters needing attention in the automatic carton sealing machine
- 4 、Operation method of adhesive Tape sealing Machine
- 5 、Matters needing attention of adhesive tape sealing machine
- 6 、What are the classifications of tape sealing machines?
Carton automatic sealing machine tape how to avoid wrinkles?
Mei Yi sealing machine
1. The belt press roller is narrower than the belt. Tape bonding is actually a process in which the belt roller pushes the tape away, and the role of the press roller can also play the role of flattening the tape, so if the belt roller is narrower than the width of the tape roll, then the belt roller can not play a good role in pressing the tape, there will be wrinkles.
2. The tape is too thin. The quality of the tape also plays an important role in the sealing effect of the carton automatic sealing machine, such as accumulation, fold, weak adhesion and so on. All these are caused by the quality of the tape, so the wrinkling of the tape is caused by the thin tape.
3. There are many reasons for the wrinkling of the carton sealing tape, such as the uneven cover of the carton or the uneven cutting surface of the tape, which may lead to the wrinkling of the tape. the above two reasons are only two examples, but these two reasons are also applicable to packaging equipment such as box opener and corner sealing machine.
Which is the best automatic sealing machine for adhesive tape?
There are many kinds of tape sealing machine, if customers need to buy tape sealing machine, Xinwei Jiayin sealing machine is good, sealing machine mainly considers carton size, customer’s specific requirements, sealing is one-word sealing, corner sealing or I-shaped sealing, this depends on how the customer operates.
What are the matters needing attention in the automatic carton sealing machine
Meiyi Packaging tells you: the carton automatic sealing machine seems to be a very simple packaging equipment, but in fact, there are safe operation procedures and problems that need to be paid attention to. If these places are not paid attention to, it may cause personnel injury.
1. Be careful when installing the tape. Users who have used the sealing machine all know that when installing the tape roll, it is necessary to go through the position of the sealing machine blade, and according to the operating rules, the tape head should be cut with scissors, but many operators directly use the blade of the sealing machine to cut the tape for convenience, but in this way, the operator may come into contact with the blade and may be scratched if not careful.
2. Keep away from the mechanical arm of the folding cover sealing machine. The mechanical arm of the folding cover sealing machine is moving when it is working, although there is a protective device on the machine, but in daily work, sometimes the flow in front of it may need to be operated manually, when the distance between the mechanical arm and the operator is relatively close. if you don’t pay more attention, it may cause injury.
Operation method of adhesive Tape sealing Machine
The working principle of the sealing machine: turn on the power supply, start the motor, and enter the sealing machine through the transmission belt. When the left and right movements of the sealing machine touch the tape, the left and right movements can complete the sealing actions such as taping, smoothing, cutting and so on.
Operation method
1. Adjust the height of the worktable: loosen the tripod locking screw on the inside of the tripod, pull out the tripod adjustment frame according to the required height, and then tighten the tripod locking screw.
2. Put the box into the conveyor belt and the length is about 1/3 of the length of the box. According to the size of the box, shake the vertical handle, move the lifting frame, adjust the height of the upper movement, and make the upper movement reach the box.
3. In order to make the box cover close, adjust the position of the guide wheel. Release the handwheel, push the guide wheel frame, make the guide wheel close to both sides of the box, and then lock the handwheel.
4. Shake the horizontal handle, adjust the position of the conveyor belt horizontally, make the conveyor belt close together and clamp the box, then take out the box, and then shake the handle to make the conveyor belt lean again. after the adjustment, you can work continuously.
5. Install the tape reel on the belt seat of the upper and lower movements according to the drawing, so that the glue surface is facing the direction of entering the box, and then the glue surface bypasses the guide belt idler wheel, the glue surface bypasses the unidirectional copper wheel, and the front and rear to the top line and the rubber wheel, keep the glue facing the direction of entering the box.
6. Press the power switch and push it into the box. The box moves forward with the conveying belt and automatically completes the action of sealing the carton up and down and cutting the belt through the continuous sealing mechanism.
Matters needing attention of adhesive tape sealing machine
1. First, put the box sealing machine on the horizontal bottom, lock the brake casters, adjust the tripod to a suitable height, so that the machine base is in a horizontal position.
2. Put the cartons that need to be sealed on the conveying table:
A. adjust the lifting handle so that the conveying bottom plane of the adhesive belt head seat is lower than the height of the carton about 3~5mm.
B, loosen the locking handwheel, adjust the conveying stick, make the conveying stick close to the carton, and then lock the handwheel
C, adjust the carton positioning wheel so that the carton positioning wheel and the conveying clamp stick lean against the carton at the same time, and then lock the handwheel.
3. Turn on the power switch to make the machine work, and then push it into the carton to seal the carton. If you find that the tape of the upper and lower sealing box is loose and tight, adjust the knob of the belt cylinder seat (generally, if the tape is too tight, relax the spring pressure; if the tape is too loose, tighten the spring pressure).
4. If the length of the two ends of the sealing tape is not consistent, adjust the cutting blade in the tape head (usually long head and short tail, adjust the blade, loosen the locking screw of the blade, move the cutter out a little bit, then lock the screw, otherwise, the head is short and the tail is long. Move the cutter in a little bit)
What are the classifications of tape sealing machines?
The sealing machine adopts instant adhesive tape to seal the carton, which is economical, fast and easy to adjust, can complete the upper and lower sealing action at one time, and can also use printing tape, which can improve the product image and is the first choice of automatic packaging for enterprises. Can be divided into semi-automatic sealing machine, pneumatic sealing machine, folding cover sealing machine, corner sealing machine, side sealing machine and other series. The sealing machine produced is light and durable and easy to operate.
This is the end of the introduction of carton tape sealing machine. Thank you for taking the time to read the contents of this site. Don’t forget to look for more information about carton tape sealing machine graduation thesis and carton tape sealing machine.