A list of the contents of this article:
- 1 、How to load the adhesive tape in the sealing machine? How to adjust the length?
- 2 、How to use the tape packing machine
- 3 、I want to make sealing tape. How much does it cost to use those machines?
- 4 、Operation method of adhesive Tape sealing Machine
- 5 、Matters needing attention of adhesive tape sealing machine
How to load the adhesive tape in the sealing machine? How to adjust the length?
Sealing machine packing tape
Install the tape on the mandrel of the sealing machine
The tape needs to be pulled out (the adhesive surface of the tape we pull out must face out)
Is to pull the tape around the knurled sleeve in the movement, and then continue to pass the tape through the sleeve.
Continue to wrap the tape around the knurled sleeve after passing through the sleeve
The sealing machine core piercing process is completed by wearing the tape from the black steel inner sleeve, but the final process needs to be paid attention to in the wearing process, and the operator should be careful to seal the cutter to prevent the cutting accident. The specific wearing process is shown in the following figure.
Adjusting the length of adhesive tape of box sealing machine
First of all, put the tape roll of the new sealing machine into the mandrel, as shown in the picture, second, pull out the tape, bypass drum C and then bypass drum B, third, bypass drum D, and finally pass the tape through tape holder E through drum F, as shown in the following figure. In the whole process, it must be noted that the sticky side of the tape must face outward.
2. The tape piercing diagram is shown in the figure:
3. Adjust the orientation of the tape as shown in the figure:
If the tape is not on the centerline of the box, please refer to the following picture: loosen nut B, then adjust the mandrel with a screwdriver, and then adjust the orientation of the tape.
4. Adjust the tape tension as shown in the figure:
By rotating the knob, the speed of the tape coil can be moderate, the nut M8 can be loosened, the front and rear orientation of the screw M8 × 50 can be adjusted, the elastic force of the long tension spring of the pendulum bar can be changed, and then the tension of the tape can be controlled. When the knob is rotated clockwise, the tape tension becomes larger, and vice versa; when the screw M8 × 50 is adjusted forward, the tape tension increases, and vice versa.
How to use the tape packing machine
How to use the tape baler:
1. First of all, it is necessary to open the drum of the tape baler.
2. Put the whole roll of tape into the tape cutter.
3. Fix the tape roll with a fixed core.
4. Pull out the front part of the whole roll of tape and let the tape pass through the gap between the front shaft of the tape cutter and the bottom from the bottom. Please make sure that the sticky side of the tape is facing down in order to make the tape slide smoothly.
5. The next step is to gently pull the small square at the front of the tape, pull down a piece of tape, and then gently pull the blade back to cut the tape.
I want to make sealing tape. How much does it cost to use those machines?
The price of sealing tape machine is between 3000 and 10000 yuan.
For the choice of tape sealing machine, the first thing to confirm is the problem of the manufacturer. It is more important for customers who buy tape sealing machine equipment to choose which manufacturer is good. Therefore, choose the appropriate tape sealing machine equipment, the premise is to choose a good manufacturer.
According to the different sealing parts, the adhesive tape sealing machine can be divided into top, bottom tape sealing machine and side tape sealing machine. The way your products are packed also affects which form of tape sealing machine you should choose.
Matters needing attention in the selection and purchase of adhesive tape sealing machine
In principle, the earlier the tape sealing machine manufacturer is established, the more reliable his products will be and the better the quality will be. Because his products have been tested by the highly competitive market, if his quality is not excellent, he will fall down long ago. The so-called “century-old stores” all believe in the power of old brands.
The selection and purchase of tape sealing machine also involves a series of overall and systematic inspection standards, such as a manufacturer’s technical strength, service quality, after-sales guarantee and so on. First of all, this tape sealing machine manufacturer should have a strong R & D team as well as a strong sales and service team. In this way, the tape sealing machine can be bought at ease.
Operation method of adhesive Tape sealing Machine
The working principle of the sealing machine: turn on the power supply, start the motor, and enter the sealing machine through the transmission belt. When the left and right movements of the sealing machine touch the tape, the left and right movements can complete the sealing actions such as taping, smoothing, cutting and so on.
Operation method
1. Adjust the height of the worktable: loosen the tripod locking screw on the inside of the tripod, pull out the tripod adjustment frame according to the required height, and then tighten the tripod locking screw.
2. Put the box into the conveyor belt and the length is about 1/3 of the length of the box. According to the size of the box, shake the vertical handle, move the lifting frame, adjust the height of the upper movement, and make the upper movement reach the box.
3. In order to make the box cover close, adjust the position of the guide wheel. Release the handwheel, push the guide wheel frame, make the guide wheel close to both sides of the box, and then lock the handwheel.
4. Shake the horizontal handle, adjust the position of the conveyor belt horizontally, make the conveyor belt close together and clamp the box, then take out the box, and then shake the handle to make the conveyor belt lean again. after the adjustment, you can work continuously.
5. Install the tape reel on the belt seat of the upper and lower movements according to the drawing, so that the glue surface is facing the direction of entering the box, and then the glue surface bypasses the guide belt idler wheel, the glue surface bypasses the unidirectional copper wheel, and the front and rear to the top line and the rubber wheel, keep the glue facing the direction of entering the box.
6. Press the power switch and push it into the box. The box moves forward with the conveying belt and automatically completes the action of sealing the carton up and down and cutting the belt through the continuous sealing mechanism.
Matters needing attention of adhesive tape sealing machine
1. First, put the box sealing machine on the horizontal bottom, lock the brake casters, adjust the tripod to a suitable height, so that the machine base is in a horizontal position.
2. Put the cartons that need to be sealed on the conveying table:
A. adjust the lifting handle so that the conveying bottom plane of the adhesive belt head seat is lower than the height of the carton about 3~5mm.
B, loosen the locking handwheel, adjust the conveying stick, make the conveying stick close to the carton, and then lock the handwheel
C, adjust the carton positioning wheel so that the carton positioning wheel and the conveying clamp stick lean against the carton at the same time, and then lock the handwheel.
3. Turn on the power switch to make the machine work, and then push it into the carton to seal the carton. If you find that the tape of the upper and lower sealing box is loose and tight, adjust the knob of the belt cylinder seat (generally, if the tape is too tight, relax the spring pressure; if the tape is too loose, tighten the spring pressure).
4. If the length of the two ends of the sealing tape is not consistent, adjust the cutting blade in the tape head (usually long head and short tail, adjust the blade, loosen the locking screw of the blade, move the cutter out a little bit, then lock the screw, otherwise, the head is short and the tail is long. Move the cutter in a little bit)
This is the end of the introduction of tape sealers and manufacturers of tape sealers. Have you found the information you need? If you want to know more about this, remember to collect and follow this site.