A list of the contents of this article:
- 1 、Which is the best automatic sealing machine for adhesive tape?
- 2 、What are the classifications of tape sealing machines?
- 3 、How does the automatic box sealing machine work?
- 4 、How does the automatic tape sealing machine cut the tape?
- 5 、Operation method of adhesive Tape sealing Machine
- 6 、Automatic sealing tape machine what is the tape wrinkle?
Which is the best automatic sealing machine for adhesive tape?
There are many kinds of tape sealing machine, if customers need to buy tape sealing machine, Xinwei Jiayin sealing machine is good, sealing machine mainly considers carton size, customer’s specific requirements, sealing is one-word sealing, corner sealing or I-shaped sealing, this depends on how the customer operates.
What are the classifications of tape sealing machines?
The sealing machine adopts instant adhesive tape to seal the carton, which is economical, fast and easy to adjust, can complete the upper and lower sealing action at one time, and can also use printing tape, which can improve the product image and is the first choice of automatic packaging for enterprises. Can be divided into semi-automatic sealing machine, pneumatic sealing machine, folding cover sealing machine, corner sealing machine, side sealing machine and other series. The sealing machine produced is light and durable and easy to operate.
How does the automatic box sealing machine work?
There are many manufacturers of sealing machines, but their working principles are all the same. Let’s take (Liyue packaging) automatic sealing machine as an example: seal the upper and lower bottom of the packaging carton with tape. The automatic sealing machine can also automatically adjust the height and width of different packaging sizes, which is suitable for mass production. After the product is boxed, it is sent to the sealing machine through the conveyor chain (belt, roller) and submitted to the box conveying mechanism. The box belt clamps the two sides of the carton and moves forward. The front short tongue is automatically bent by the tongue pressing rack, and the rear short tongue is automatically bent by the tongue holder when the carton enters the supporting roller of the sealing machine, there is a detection signal (photoelectric signal) to inform the action of the tongue cylinder, and there is a signal to inform the glue melting machine to spray glue automatically. The carton continues to move forward, and the left and right long tongues automatically bend to the middle through the guide bar, while pressing the box mechanism belt, pressing the left and right long tongues of the carton synchronously, so that the box, tongue and glue are glued together to complete the sealing and shaping movement. that is, the last process of product packaging-automatic sealing.
How does the automatic tape sealing machine cut the tape?
Based on the principle of lever connection, the weight of the box itself is used to press down the guide belt roller. when leaving the roller, the cutting blade at the other end will lift and cut the tape at the same time.
Qingdao Zhengbo Packaging Machinery Co., Ltd.
Operation method of adhesive Tape sealing Machine
The working principle of the sealing machine: turn on the power supply, start the motor, and enter the sealing machine through the transmission belt. When the left and right movements of the sealing machine touch the tape, the left and right movements can complete the sealing actions such as taping, smoothing, cutting and so on.
Operation method
1. Adjust the height of the worktable: loosen the tripod locking screw on the inside of the tripod, pull out the tripod adjustment frame according to the required height, and then tighten the tripod locking screw.
2. Put the box into the conveyor belt and the length is about 1/3 of the length of the box. According to the size of the box, shake the vertical handle, move the lifting frame, adjust the height of the upper movement, and make the upper movement reach the box.
3. In order to make the box cover close, adjust the position of the guide wheel. Release the handwheel, push the guide wheel frame, make the guide wheel close to both sides of the box, and then lock the handwheel.
4. Shake the horizontal handle, adjust the position of the conveyor belt horizontally, make the conveyor belt close together and clamp the box, then take out the box, and then shake the handle to make the conveyor belt lean again. after the adjustment, you can work continuously.
5. Install the tape reel on the belt seat of the upper and lower movements according to the drawing, so that the glue surface is facing the direction of entering the box, and then the glue surface bypasses the guide belt idler wheel, the glue surface bypasses the unidirectional copper wheel, and the front and rear to the top line and the rubber wheel, keep the glue facing the direction of entering the box.
6. Press the power switch and push it into the box. The box moves forward with the conveying belt and automatically completes the action of sealing the carton up and down and cutting the belt through the continuous sealing mechanism.
Automatic sealing tape machine what is the tape wrinkle?
Automatic box sealing machine is also known as tape sealing machine, carton bottom sealing machine, etc., according to the location of sealing box, there are one word sealing machine, folding cover sealing machine, I sealing machine, side sealing machine, etc., no matter which kind of automatic sealing machine, the most common problem in the sealing process is the folding and bonding of the tape. Qingdao Youchuang technical personnel according to many years of maintenance experience, there are generally the following problems:
1. Using the machine movement to cut the tape for a long time, the blade is worn, or there is residual tape on the surface of the blade, resulting in abnormal cutting tape.
2. When the blade is in contact with the tape, it is different from left to right, which results in the pulling of the tape when it breaks.
3. The pull spring of the rubber roller is not strong enough.
4. the cutting position of the tape is decisive or too long.
5. The tape does not match the cutting blade. The tape is wide and the blade is narrow.
The above problems often cause tape wrinkles, if it can not be completely solved, you need to find professional and technical personnel to communicate, although the structure seems simple, but the technical point of the automatic sealing machine is still relatively high.
This is the end of the introduction of automatic tape sealing machine and automatic sealing machine. I don’t know if you have found the information you need. If you want to know more about this, remember to collect and follow this site.