A list of the contents of this article:
- 1 、What is the classification of labeling machines?
- 2 、What is the labeling machine?
- 3 、What are the top ten brands of automatic labeling machines
- 4 、How to solve the problem of continuous bidding of labeling machine?
- 5 、How to debug the automatic labeling machine?
- 6 、How to choose a labeling machine?
What is the classification of labeling machines?
A labeling machine (Labeller) is a device for pasting rolls of self-adhesive paper labels (paper or metal foil) on PCB, products or prescribed packaging. Labeling machine is an indispensable part of modern packaging.
Overview of labeling machine:
1. Correct standard
When the label is affixed to the packaging container, the deviation between the centerline of the label and its theoretical position is within the prescribed range, which is called a positive standard. If there are multiple labels on the same packing container, the deviation between them and the theoretical position should be calculated according to the above definition, all within the prescribed range.
2. Labeling rate
The percentage of the number of packaging containers labeled according to the labeling requirements (single label or multiple labels) to the total number of packaging containers inspected.
3. Damage rate
In the labeling process, the percentage of the number of labels damaged by the labeling machine to the total number of labels consumed by the inspected packaging containers.
4. Correct standard rate
In the packaging containers being inspected, the percentage of the number of standard packaging containers to the total number of packaging containers to be inspected.
Labeling machine classification:
According to different viscose coating methods, it can be divided into self-adhesive labeling machine, paste labeling machine (paste labeling machine, glue labeling machine) and hot melt labeling machine.
According to the degree of automation, it can be divided into manual labeling machine, semi-automatic and fully automatic.
According to the realization of different labeling functions, it can be divided into plane labeling machine, double-sided labeling machine, side labeling machine and circumferential labeling machine.
These products can complete plane paste, single-sided or multi-sided paste of packaging, cylindrical paste, partial or full cover cylinder paste, depression and corner paste, and so on.
The types of products are divided into straight-line labeling machine and rotary labeling machine. The main categories are: automatic vertical round bottle labeling machine, fully automatic horizontal round bottle labeling machine, automatic corner labeling machine, automatic red wine labeling machine, plane labeling machine, fully automatic plane assembly line labeling machine, upper and lower self-adhesive labeling machine, bilateral pneumatic labeling machine, unilateral labeling machine, semi-automatic plane labeling machine, semi-automatic round bottle labeling machine and so on.
What is the labeling machine?
Like the shampoo we use in our daily life and the labels on the drinks we drink, we use a labeling machine to complete the labeling work.
Labeling machine classification has semi-automatic labeling machine and automatic labeling machine, from the name above, it is easy to understand, it is nothing more than the level of automation, the higher the degree of automation, the more expensive.
Round bottle labeling machine: generally used for cylindrical bottle labeling, there are two ways of labeling, one is horizontal labeling, that is, the bottle lies flat on the conveyor belt to complete the labeling process, and the other is vertical labeling, that is, standing directly. Semi-automatic round bottle labeling machines are generally horizontal labeling, while fully automatic round bottle labeling machines are horizontal and vertical.
Plane labeling machine: that is, a labeling machine for the surface of an object, such as a bar code or a bottle cap labeling, which is generally vertical, but also less than horizontal labeling.
Double side labeling machine: Head & Shoulders shampoo like 250ml is a flat bottle, and his sides are labeled. This is the double side labeling.
In fact, many products can be labelled using labeling machines, and most of them are customized labeling machines, that is, specially customized labeling machines according to product requirements.
What are the top ten brands of automatic labeling machines
Automatic labeling machine specific top ten brands I have not systematically studied, but now there are really many labeling machines on the market, the price is also uneven, here recommend Vidi Jie professional automatic labeling machine, Vidi Jie with less consumables, cost-effective characteristics of the majority of market recognition, and the company’s reputation has been trustworthy.
Vista automatic labeling machine features: automatic and precise mechanical control almost completely eliminates downtime; a single intuitive user interface simplifies operation; GS1 standard bar code for hit-and-paste up to 150packs / min; industrial modular design to meet the needs of a variety of applications. Whether the code on the carton is clear and accurate is a key factor related to the effectiveness of inventory and supply chain management. In order to meet a variety of spray printing needs and applications, the professional automatic labeling machine technology has been constantly updated and improved. at present, Vidi automatic labeling machine has been used in packaging labeling operations in various industries. Videojet serves customers in the consumer packaging, pharmaceutical, medical device and industrial products industries, helping to increase productivity, protect and develop brands, and maintain industry trends and compliance leadership. Welcome to consult Weidijie inkjet printer.
If you want to know more about labeling machines, recommend Vista labeling machines. Vista automatic printing and labeling machines are ideal for marking high-resolution text, bar codes and graphics on cartons, pallets and shrink films, with high contrast and excellent bar code reading rates. Vista automatic printing and labeling machine uses Direct Apply direct labeling technology, does not need a labeling arm, and can achieve accurate labeling of labels on packaging even at high speed. Welcome to contact us to consult the automatic labeling machine.
How to solve the problem of continuous bidding of labeling machine?
If the problem of continuous bidding of the labeling machine is solved, the score is as follows:
First, the fault of measuring standard electric eye
Solution: put the label in the electric eye detection area of the measuring mark, slide the label to obtain and disconnect the signal, and observe whether the signal light flashes in the IO monitoring on the touch screen. If the signal light does not flicker, the electric eye may fail or the connection may be loose.
Second, the label paper did not pass through the electric eye detection area of the mark.
Solution: install the label paper through the electric eye detection area of the measuring mark.
Third, dust, powder, broken labels, etc., cover the electric eye detection end.
Solution: clean the electric eye in time, pay attention to cleaning under dry conditions, do not use cleaning tools such as wet cloth.
Fourth, the effective signal of the electric eye has not been adjusted properly.
Solution: reset the marker electric eye. (set up according to the operation flow of each type of standard electric eye manual)
Fifth, the type of electric eye used is invalid for the material and nature of the label itself. If the transparent label is used on the equipment, when the detection eye is an ordinary marker eye, it may occur that after the measuring object is sensed by the electric eye, the label will be peeled off continuously.
Solution: replace the corresponding standard electric eye which can detect the effective signal normally.
Note: operate according to the instructions. In case of failure, do not disassemble the labeling machine privately, you should contact the labeling machine supplier as soon as possible.
If you want to know more about labeling machines, recommend Vista labeling machines. Vista automatic printing and labeling machine uses Direct Apply direct labeling technology, does not need a labeling arm, and can achieve accurate labeling of labels on packaging even at high speed. Whether the code on the carton is clear and accurate is a key factor related to the effectiveness of inventory and supply chain management. In order to meet a variety of spray printing needs and applications, the professional automatic labeling machine technology has been constantly updated and improved. at present, Vidi automatic labeling machine has been used in packaging labeling operations in various industries. Welcome to contact us to consult the labeling machine.
How to debug the automatic labeling machine?
Generally speaking, the debugging of the automatic labeling machine includes the following four parts, namely: the star wheel in the bottle, the star wheel in the bottle, the adjustment of the screw rod in the bottle, the adjustment of the marking station, the adjustment of the pressure brush device and the adjustment of the label box.
1. The adjustment of the star wheel in the bottle, the star wheel out of the bottle and the screw rod in the bottle: when adjusting the star wheel and the screw rod in the bottle, the bottle head of the standard machine shall prevail. First of all, adjust the star wheel in the bottle, when the bottle head is just over the bottle, adjust the star wheel in the bottle so that the bottle is in the middle of the grooves. Adjustment of the screw rod in the bottle: according to the star wheel in the bottle, when the bottle is located in the middle of the groove of the star wheel in the bottle, adjust the screw rod so that the side of the screw rod is close to the bottle without displacement. Adjustment of the star wheel: when the bottle head has just been lifted, one-sided automatic labeling manufacturers quote, adjust the star wheel so that the bottle is located in the middle of the groove of the star wheel.
2, the adjustment of the label box: the center line of the label box, the center axis of the label station is tangent to the label paper, the center axis of the label board forms a line at three points, adjust the tangency between the label board and the label paper (0 distance), and then move the label box close to the 1mm~2mm. The gap between the label paper in the standard box and the strips on both sides should be between the 0.8mm~1mm, the gap is too large to cause the label to shift in the standard box, there is an oblique mark, and the gap is too small to cause the mark to be pushed unsmoothly. The adjustment of the hook position of the standard box: the upper and lower, the left and right hook are on the same vertical plane and work evenly on the label paper, then the mark can be grasped smoothly. Label supply roller adjustment: when there is no label, the label press plate can be pressed to the front of the label box and when the label is installed, the label hook refers to the label nearby can not be crushed.
If you want to know more about labeling machines, recommend Vista labeling machines. Whether the code on the carton is clear and accurate is a key factor related to the effectiveness of inventory and supply chain management. In order to meet a variety of spray printing needs and applications, the professional automatic labeling machine technology has been constantly updated and improved. at present, Vidi automatic labeling machine has been used in packaging labeling operations in various industries. Welcome to contact us to consult the automatic labeling machine.
How to choose a labeling machine?
How should we choose the automatic labeling machine? Do you want to buy brand new ones or secondhand ones? First of all, as long as our economic conditions permit, it is certainly best to buy a brand-new labeling machine. There are three reasons.
First, we don’t have to worry about whether there are hidden diseases in the brand-new automatic labeling machine, because it is all made through all kinds of strict assembly and measurement and control by the labeling machine manufacturers, so it has high security and good stability.
Second, the after-sales service of the brand-new labeling machine is guaranteed. If the machine breaks down when it is in use, you can find after-sales personnel to repair it, while it is very difficult for second-hand labeling machines to protect their own interests. Third, in terms of performance-to-price ratio, because it is difficult to determine the performance of new and old labeling machines, it is open to question whether it is cost-effective to buy second-hand products. In addition, we also need to consider whether those who buy second-hand products have been cheated by others. After all, it is really a loss to buy them for two days. Secondly, if the requirements for labeling machines are not high, and the funds invested in the equipment are not sufficient, buying second-hand is indeed the best choice. After all, a regular second-hand labeling machine will have relevant performance parameters, and it can meet the needs of the middle and lower processing market in its main functions. Although it is not as good as brand-new in terms of quality and speed, the function of labeling can still be satisfied. it’s just that the efficiency of processing is relatively low. And the second-hand labeling machine can also achieve the recycling of resources. In this way, when we find it difficult to maintain production demand, we can sell it to manufacturers with lower production demand than our own.
This is the end of the introduction of labeling machines and labeling machine manufacturers. Have you found the information you need? If you want to know more about this, remember to collect and follow this site.