Article catalogue:
- 1 、What is an injection molding machine manipulator?
- 2 、How to find the mold number for the manipulator of injection molding machine
- 3 、How to operate the manipulator of injection molding machine?
- 4 、What is the working principle of the injection molding machine manipulator?
What is an injection molding machine manipulator?
The manipulator of the injection molding machine is specially equipped for the automation of injection molding production, and it can imitate the function of the upper part of the human body. it is an automatic production equipment that can automatically control the manipulator so that it can transport finished products or control tools in accordance with predetermined procedures.
How to find the mold number for the manipulator of injection molding machine
First of all, to find the mold number of the injection molding machine manipulator, we need to understand the basic structure and function of the injection molding machine manipulator. The manipulator of the injection molding machine is a kind of mechanical equipment used for automatic production, which is mainly used to remove the plastic products produced by the injection molding machine from the mold and carry out the next step of processing. The module number is usually marked on the shell of the manipulator or on the electric control box.
If you have determined the brand and model of the manipulator, you can find the model number through the brand’s official website or the relevant product manual. In addition, you can also get relevant information by contacting the manufacturer or seller of the manipulator.
If you do not determine the brand and model of the manipulator, you can find the module number in the following ways:
1. Observe the appearance characteristics of the manipulator, such as the structure of the manipulator, the length of the arm, the shape of the claw, etc., and then search for similar manipulator models and models through the search engine or related product manuals.
two。 Check the identification on the electric control box or control panel of the manipulator, usually marking the model number and module number of the manipulator.
3. Look for the operating instructions or maintenance manual of the manipulator, which will describe the model and module number of the manipulator in detail.
In short, to find the mold number of the injection molding machine manipulator requires you to have a certain understanding of the basic structure and function of the manipulator, and through a variety of ways to obtain relevant information.
How to operate the manipulator of injection molding machine?
1. Make sure that the power supply, air pressure source and other power supplies are connected correctly, and check that the pressure of the manipulator air pressure regulator is 0.4mpa0.6mpa.
two。 Turn on the power of the robot and reset the origin of the manipulator.
3. Set each action mode of the manipulator (according to the specific product selection).
4. Input the standby position and clamping position of the manipulator according to the label parameters on the manipulator fixture.
5. Set the opening stroke of the injection molding machine according to the parameters on the label.
6. Check whether the clamping screw is loose, whether the clamping part is damaged, whether the cylinder is stretching normally, whether it is leaking, whether the sucker is in good condition, and whether the hardware is stuck.
7. After the fixture is installed, observe whether all the hardware fittings of the fixture are on the same vertical surface. If not, adjust the locking screws on the connecting bolts so that the fixture is on the same vertical surface.
8. Semi-automatically adjust the clamping position, adjust the OK and save the parameters.
9. Then set the position of the manipulator, the opening position on the way, the opening position of the product, and so on.
10. Enter the manipulator timer module and initially set each action time. The ejection delay (2s) and backward delay (5s) of the ejector rod of the injection molding machine are preliminarily set.
11. Fully automatic operation of injection molding machine and manipulator.
twelve。 In the first fully automatic state, in order to optimize the cooperation between the manipulator and the injection molding machine, please carefully observe the operation of the two devices in the fully automatic state, and then fine-tune each time of the manipulator and the injection molding machine (ejection delay, intermediate cycle time, etc.).) To enable the manipulator to achieve the fastest and stable action response.
13. After adjustment, fully automatic production will be carried out. Observe for more than 20 hours and leave until there is no fault alarm.
What is the working principle of the injection molding machine manipulator?
Working principle of injection molding machine manipulator:
The executive structure of the injection molding manipulator is generally driven by the cylinder, the whole action of the manipulator is driven by the cylinder, and the solenoid valve controls the corresponding action of each cylinder. Among them, the left / right shift and the rise / fall are respectively controlled by two-position solenoid valves with double coils. When the solenoid valve of the descending action is powered on, the manipulator completes the descending action, and when the solenoid valve of the descending action is powered off, the manipulator drops and stops. The manipulator begins to rise only when the rising solenoid valve is powered on; when the rising solenoid valve is powered off, the manipulator rises and stops. Similarly, the left / right shift is controlled by the left-moving solenoid valve and the right-moving solenoid valve, respectively. The clamping / relaxing action of the manipulator is controlled by a single coil (called a clamping solenoid valve). The coil is electrified and the manipulator is clamped; the coil is powered off and the manipulator is relaxed.
When the injection molding machine manipulator moves to the right and is ready to descend, in order to ensure safety, it is necessary to ensure that there are no workpieces on the right worktable before the manipulator is allowed to descend. In other words, if there is a workpiece on the right worktable that was moved last time and has not been removed, the manipulator will stop falling automatically.
After the above process, the injection molding machine manipulator completed a work cycle and carried out the above actions over and over again.
This is the end of the introduction of the injection molding machine manipulator. Thank you for taking the time to read the contents of this site. Don’t forget to look for more information about the top ten brands of injection molding machine manipulators and injection molding machine manipulators.