Article catalogue:
- 1 、Is the car crane motor 12v DC motor?
- 2 、Does the minivan install the small crane to review the dismantling of the car?
- 3 、Can a 12-volt winch connect a 24-volt battery?
- 4 、How to install small cranes for agricultural tricycles
- 5 、The car crane can only be hoisted and can’t be put down. what’s going on?
Is the car crane motor 12v DC motor?
Yes.
Car-mounted small crane is divided into 12 volts and 24 volts, it is mainly used in trucks, as a DC motor, can be used as a hoist and winch.
In products such as small cranes, car-mounted small cranes are mainly used for the loading and unloading of large quantities of goods. Can be said to be loading and unloading and transportation as one of the hoisting equipment.
Does the minivan install the small crane to review the dismantling of the car?
The car review will be dismantled.
The small crane installed in the minivan is a special refit. If it is not reported or examined and approved by the department, it cannot be installed without authorization.
If your installation is not reported, it will be illegally modified by the staff at the testing station, and you will be asked to disassemble it. If you insist on not dismantling it, it is possible to impound your vehicle.
Can a 12-volt winch connect a 24-volt battery?
The 12-volt winch cannot connect 24-volt batteries. 12 volts 24 volts electric winch, the large model is 12000 pounds electric winch. The 20, 000-pound electric winch, which can help customers lift one to two tons of cargo, is slightly larger. The 12-volt 12000-pound electric winch, with a self-weight of 35 kg, is packed in wooden cases. Each electric winch is equipped with 20 meters of wire rope and a control box remote control system. The 24-volt 20, 000-pound electric winch produced by our factory, which weighs 48 kilograms, is packed in wooden cases and is double-controlled by matching switches and remote controls. It can be equipped with a small crane installed in the car, can also be installed in front of the car for hoisting and traction system, customers in. When the wire rope comes out of the rope, the rope can be reduced to reduce the rotation of the motor and prevent the motor from heating. Electric winch products matching batteries should not be wrong, 12 volts and 24 volts are not universal.
How to install small cranes for agricultural tricycles
Just assemble the installation manual of the 12v small crane.
A very important step is to install the base of the small car crane securely. If the heavy load is not too heavy, you can choose to tighten the installation with screws.
The car-mounted small crane is fixed in the middle of the front of the tricycle or on the left and right sides.
After the tricycle installs the car-mounted hoisting machine, the method of operation is as follows; because the porridge bucket is relatively hot, the volume is relatively large, and the surface is relatively smooth, it is certainly not possible to use steel wire rope. in this case, there is no way, Xiao Hong suggested to use, oil barrel clamp clamp on the three corners of the porridge barrel, must step up efforts to avoid loosening caused by hot porridge scattered outside.
The car crane can only be hoisted and can’t be put down. what’s going on?
The car-mounted crane can only be hoisted but not put, and the limit switch in the hoisting of the small crane does not return to the position, which accounts for more than 80%, mainly because of improper operation. The limit switch of the small crane is a limiter installed at the front of the boom, which is a small box switch with a small metal contact at the front end. It is the safety protection device of the small crane, which will touch the metal contact when the hook is in place, then the rising running circuit of the motor will be disconnected and the machine will stop automatically.
Car-mounted crane can only be hoisted, not for other reasons.
Small crane handle button switch core burned out, this situation is also more common, but also easy to check out, generally the switch core burnt out will have a charred smell. Press the handle button because the starting capacitor inside the handle is fully charged during use, you must disconnect the power plug when opening the handle switch of the small crane, and press the up and down buttons of the handle several times after disconnection.
Whether the brake system is invalid, because each hoist will be equipped with a brake system, press will go up, do not press will automatically go back, there is only up and down the case can check the brake system. Summer has arrived, the weather is hot, the use of a small crane under high temperature, can not avoid the situation that the motor will burn out, it will only cause the situation of not going up and down.
You can check whether the limit line of the connecting handle is off or damaged, and if it is damaged, please replace it in time. The limiter is broken, this reason is more likely, check the limit switch, if the limit switch is stuck or broken, timely troubleshooting or replacement of a new limit switch.
This is the end of the introduction of the small crane in the car. Thank you for taking the time to read the contents of this site. Don’t forget to look for more information about the installation video and the small crane on this site.