A list of the contents of this article:
- 1 、How to store jujube
- 2 、How to make woven bag palletizing and anti-skid
- 3 、How to carry out the palletizing of Pleurotus ostreatus bag?
- 4 、Plastic pallet palletizing 25kg bag how tall is 1.5t
How to store jujube
Dried jujube is stored in the north, when it is stored in large quantities, it is stored in gunny bags. When palletizing, there should be a ventilated gap between the bag and the bag and between the bag and the stack to facilitate ventilation. The wall is more or less damp. Don’t get too close to the wall. During the mildew and heat period, one is to cover each bag of dried dates with a gunny bag, which is beneficial to insulate the moisture. Second, pay attention to closing the doors, windows and vents of the warehouse. When the outside temperature is low and dry, discharge the air from the library and change it into the dry air. Setting the moisture absorption point of lime in the warehouse can significantly reduce the humidity.
When the storage capacity is small, the jar (altar) can be used for storage, and the mouth of the jar (altar) is tightly sealed with plastic film and placed in a cool place to spend the summer safely.
In the south, high temperature and humidity, mildew and summer season should be stored in cold storage. Dried jujubes are packed in gunny bags and stored in a 5 ℃ warehouse. Before leaving the cold storage, move to a slightly higher temperature and gradually move to the outside of the storage. In order to prevent the moisture from condensing into water droplets on the jujube fruit, do not rebag immediately, but spread it out, wait for the condensed water droplets to disappear, and then change the bag for export.
A small amount of dried jujube can be stored with rice husk ash. Spread dry rice husk ash about 1 cm thick on the ground, spread a layer of dried dates, then sprinkle rice husk ash to cover dried dates, and then spread a layer of dried dates. Such a layer of rice husk ash and a layer of dried jujube can be stacked 30~40cm high. This storage method can be moisture-proof, sterilization, jujube grain drying, the effect is better.
How to make woven bag palletizing and anti-skid
The utility model relates to a non-slip film braided bag, which is made of plastic woven cloth by cutting and sewing. The outer surface of the plastic woven cloth is coated with a plastic film layer, and the surface of the plastic film layer has a pattern protruding formed by extrusion, wherein, the pattern shape is located in the middle of the plastic woven cloth.
How to carry out the palletizing of Pleurotus ostreatus bag?
The palletizing of Pleurotus ostreatus bags includes the following tasks:
(1) timing
In general, the palletizing of bacterial bags is completed in early December. That is, the bacterial bag with obvious signs is used to build a bacterial wall to form a bacterial stack. A good pile of bacteria, and then the second stack at a distance of 60 to 80 centimeters on one side of the stack, according to this order, it is best to finish all the bags in the shed within two days.
(2) Barrier fungus wall
Cut off the film at one end of the bag and cut off the bag to form a double-row bacterial wall. The bags should be separated by filling soil, and the bacterial wall should be firm and firm. One end of the bacterial bag has a film exposed about 1.5 cm on the bacterial wall, and the space between the top and bottom of the bacterial bag is more than 3 fingers (separated by filling).
(3) filling nutritious soil
The fungus wall is built with three layers each, during which the grooves are filled with nutritious soil once. After filling the fungus wall with nutritious soil, it is necessary to pour enough water evenly, and then it can be built up again.
(4) capping
When the bacterial wall is built to the sixth or seventh floor, the filling of nutritious soil should be about 3 cm higher than the bacterial bag. Then, at the top of the Pleurotus ostreatus stack, use mud to form a pool about 10 centimeters deep, punching 3 centimeters of holes every 40 to 50 centimeters, and the hole depth is from top to bottom, at the penultimate and third-layer bags.
The bailing mushroom mushroom stack is in the shape of “steamed bread”. The bottom is about 120 cm wide and 280 cm long, and the top is about 80 cm wide and 250 cm long. the mushroom stack is made of 6-7 layers of bacteria bags (figure 3).
Fig. 3 palletizing mode and wall of Pleurotus ostreatus bags
Plastic pallet palletizing 25kg bag how tall is 1.5t
General 25kg bag palletizing, need to use 1400kg 120000150 (MM) double-sided plastic tray, each floor put 5 bags, horizontal three vertical two, a total of 12 layers, a total of 60 bags, each floor height of about 3CM, 1.5t height of about 1.8m.
This is the end of the introduction of bag stacking and palletizing methods. I wonder if you have found the information you need? If you want to know more about this, remember to collect and follow this site.