Mobile:

+86-177 7223 0517

Can sealing machine (brand of can sealing machine)

Article catalogue:

How to adjust the easy-to-pull can sealing machine

Adjustment method of easy-to-pull can sealing machine:

1. Pull the three-point controller card of the control valve in the control cabinet out of the card holder.

two。 Turn on the manual gas key switch. Depending on the machine model, the switch may be located on the control cabinet or console. The switch may take the shape of a function key.

3. The emergency jet switch can now be used to adjust the gas regulator to the required flow rate. The emergency jet switch is located on the junction box of the gas control device and can be reached from below.

Brief introduction of easy-to-pull can sealing machine:

The can sealing machine has the advantages of good sealing quality, high safety performance, simple and compact structure, convenient operation and maintenance, small volume, light weight, low noise, replacing a small number of accessories can seal large and small caliber cans. The machine is easy to operate! Its sealing is smooth, burr-free and non-leaking.

Suitable for cans, plastic cans, plastic bottles, pet bottles, paper tubes, paper cans, metal cans, traditional Chinese medicine and other food cans, all kinds of round iron, glass, plastic, pet cans, aluminum cans, paper cans and other tinplate covers, aluminum covers, cans, etc.

6726376b66842

The difference between Type 160 and 218 of can sealing Machine

A machine that seals the lid of a jar

A can sealing machine, a machine that seals the lid of a jar.

Generally summarized as: iron cans, paper cans, aluminum cans, pressure cans and so on. Due to the different lids are also divided into cans, tinplate cans and so on. According to the shape is divided into round cans, square cans, cans and so on.

According to the different degree of automation, the can sealing machine is also divided into semi-automatic can sealing machine and fully automatic can sealing machine.

According to the use characteristics can be divided into: can rotary can sealing machine, knife rotary can sealing machine.

Chinese name

Can sealing machine

Foreign name

Cans sealing maching

explain

A machine for sealing the mouth of a can

Kinds

Iron can, paper can, aluminum can, pressure can, PET can

classification

Semi-automatic

Equipment types, industry standards, scope of application, production process TA

Type of equipment

The can sealing machine, as its name implies, is the machine that seals the mouth of the can.

Generally summarized as: iron cans, paper cans, aluminum cans, pressure cans and so on. Due to the different lids are also divided into cans, tinplate cans and so on. According to the shape is divided into round cans, square cans, cans and so on.

From the above, there are many types of can sealing machine because of the type of lid, which can be divided into: general-purpose can sealing machine, square can sealing machine, special-shaped can sealing machine and so on. With the increasing requirements for shelf life in food, pharmaceutical, daily chemical industry and other industries, vacuum can sealing machine, vacuum nitrogen filling can sealing machine and so on.

According to the different degree of automation, the can sealing machine is also divided into semi-automatic can sealing machine and fully automatic can sealing machine.

According to the characteristics of use, it can be divided into knife-type can sealing machine and can-turning can sealing machine.

Semi-automatic can sealing machine

1)。 Semi-automatic can sealing machine

Semi-automatic can sealing machine generally by hand can sealing machine, pneumatic can sealing machine, electric can sealing machine and so on. Generally suitable for small business production, single-piece production, small batch production factories.

A, hand can sealing machine

Hand can sealing machine is the most extensive semi-automatic can sealing machine. Because of the advantages of stable mechanical quality and easy debugging, it is widely used by small factories, small workshops, stalls shops and other units.

The sealing principle of this machine is simple, and two knives are used for folding and sealing. The first knife is a flanging knife and the second knife is a bending fastening knife. It is generally used for non-vacuum inflatable jar sealing.

Principle:

1. Put the jar with lid on the bottom bracket.

two。 Press the jar tightly with your foot on the pedal.

3. Pull the handle to tighten the edge of the first knife and the second knife.

4. Put down the pedal and output the finished product.

B, pneumatic can sealing machine as shown in figure 1:

The degree of automation of this machine is slightly higher than that of the manual can sealing machine. The manual wrench arm and pedal are replaced by two cylinders respectively.

Principle:

Fig. 1 Pneumatic can sealing machine

1. Put the jar with lid on the bottom bracket.

two。 Press the pedal switch and press the jar tightly on the bottom support cylinder.

3. The swing arm cylinder swings to make the first knife and the second knife quickly tighten the lid edge.

4. Output of finished products.

C, electric can sealing machine as shown in figure 2:

The difference between the electric can sealing machine and the hand wrench and pneumatic is that the first knife and the second knife are installed on both sides of the die respectively.

Principle:

Fig. 2 Electric can sealing machine

1. Put the jar with lid on the bottom bracket.

two。 Step on the pedal switch or jar induction switch (different manufacturers, different practices), the bottom bracket relies on the motor cam to drive the bottom bracket to press the jar on the die.

3. Due to the role of the side swing arm cam, the first knife presses the cover crimping first, and when the cam rotates for half a week, the second knife swing arm begins to press.

4. Output of finished products.

The models mentioned above are the popular semi-automatic can sealing machines in China, and the average sealing speed of the models is between 150030 cans / min. Because the cost is low, the technical content is not high, and the quality is stable, many individuals and units use this kind of model. The disadvantage is that it is not suitable for mass automatic production lines.

Automatic can sealing machine

Automatic can sealing machine is generally used in automatic production line and mass production line. As the model is transformed from the drilling machine, so the domestic can sealing machines are large and bulky can sealing machines. Because of its high cost, high output and high technology, it is deeply favored by large enterprises.

A, automatic can sealing machine as shown in figure 3:

This model is mainly used for automatic sealing of cans. The production speed is generally 5000cans / min.

Fig. 3 automatic can sealing machine

Principle:

1. When the jar is filled from the top to the can sealer.

two。 A can sealing machine in which cans are brought in by hexagon rotation. The jar is covered by an automatic capper.

3. The hexagon continues to turn the next station, and the first roll of the knife begins to pre-curl.

Editing

Transmit video frequency

TA said

Catalogue

In

What’s going on with the olecranon on the can seal?

The can sealing machine is heated unevenly, resulting in olecranon bubbles. The reason why the olecranon appears in the can seal is that the dust and other substances absorbed during the operation of the can sealing machine will stick to the can sealing machine, making it heated unevenly, resulting in olecranon bubbles.

What are the main components of the electric can sealing machine and what are their functions?

A can sealing machine, a machine that seals the lid of a jar. Generally summarized as: iron cans, paper cans, aluminum cans, pressure cans and so on. Due to the different lids are also divided into cans, tinplate cans and so on. According to the shape is divided into round cans, square cans, cans and so on. The can sealing machine is mainly used in the sealing of cans, iron cans and paper cans. it is used in general manufacturing, daily chemical, food, beverage, chemical and other industries. Semi-automatic can sealing machine is often used alone or matched with small batch, multi-variety filling line. Automatic can sealing machine multi-horse and high-volume, single-product production line. The front process of the automatic filling machine is often equipped with fluid filling machine, powder filling machine and so on according to the different materials. The post-process is often matched with labeling machine, inkjet printer and other equipment.

This is the end of the introduction of the can sealing machine. Thank you for taking the time to read the contents of this site. Don’t forget to look for more information about the brand and the can sealing machine on this site.

Related Posts
GET IN TOUCH WITH YANMAO
Contact Form Demo (#3)
GET IN TOUCH WITH YANMAO
Contact Form Demo (#3)