Article catalogue:
- 1 、Working principle and maintenance items of billet machine in brick factory
- 2 、How to adjust the size of the perforated brick code machine
- 3 、What is the reason why the code blank machine does not clip the blank?
Working principle and maintenance items of billet machine in brick factory
Working principle of billet machine in brick factory
When the blank cutter pushes the cut billet onto the parting board, the billet dividing system works and drives the parting board to open and strip the brick. after the slitting is completed, the lifting cylinder drops, and when the chuck reaches the predetermined position, the chuck chuck works and picks up the brick blanks, then the chuck is lifted by the lifting cylinder to the predetermined height, the billet dividing system opens the air duct between the bricks, and the walking device drives the code machine to walk directly above the kiln car. The action of the rotation system is completed, the kiln car turns to 90 °, and then the lifting cylinder drops to the predetermined blank height, the chuck fixture opens and puts the brick code on the kiln car, and the code blank machine completes the process of automatic code placing brick blank, after the above action cycle, all the code blank work of the kiln car can be completed, these functions of the code blank machine are centrally controlled by electrical appliances, and the operator only needs to start the corresponding operation program to realize automatic operation.
Maintenance matters needing attention
① check whether the fastening screws of the blank machine are fastened and whether the lubrication points are lubricated or not.
② checks whether the rotating part of the equipment is flexible and whether it is stuck.
③ checks whether the air circuit, lifting chain, solenoid valve, photocell, proximity switch, etc., are in good condition, and the barometer indicates whether the required pressure is met.
④ checks whether the console button is in the specified position.
⑤ checks whether the code blank of the code blank machine is correct.
⑥ check whether the kiln car bracket bricks are clean and smooth, and whether the kiln car is in place.
How to adjust the size of the perforated brick code machine
1. Adjust the vibration: the height of the vibration platform directly affects the height and thickness of the brick. generally, when adjusting the thickness of the brick, the target size can be achieved by thickening or thinning the vibration platform. Adjusting the height of the vibrating platform requires that the platform be in a static state and be strengthened or loosened as needed.
2. Adjust the mold size: the mold size of the brick machine is mainly controlled by the upper die, the lower die and the mold adjustment control system. The size of the die needs to be adjusted according to different types and sizes of bricks. Generally, all quick loading rods or fixtures need to be removed first, and then resized.
3. Adjust the plate vibrator: the plate vibrator realizes the shaping and reinforcement of the brick by controlling the vibration intensity and frequency. Adjusting the plate vibrator needs to be adjusted according to the specific brick type, material characteristics and production process, which usually requires professional and technical personnel to operate.
What is the reason why the code blank machine does not clip the blank?
Check to see if the number of strips on the display screen is enough, for example, 33 scratches are displayed, but only 30 will not be scratched, and whether the pros and cons of the belt are hit positive or negative, and if the belt is reversed, it will not be grasped, and there is something wrong with the program.
This is the end of the introduction on how to adjust the program video and the operation video of the billet machine. I don’t know if you have found the information you need. If you want to know more about this, remember to collect and follow this site.