Article catalogue:
- 1 、What are the basic components of automatic warehousing system
- 2 、Application of principle and structure of palletizing robot
- 3 、What are the types of palletizers?
- 4 、What is the palletizing robot for?
What are the basic components of automatic warehousing system
If the classification is simple, the basic components of the automated warehousing system are:
1) Storage system: mainly composed of pallet or box conveying system, including sticker code and bar code identification equipment
2) Storage system: mainly composed of systems such as ASRS or Miniload or AutoVNA or multi-layer shuttle vehicle, including corresponding storage shelves
3) out-of-warehouse system: also composed of transportation system, which may include sorting facilities
4) Electronic control system: that is, PLC control system at equipment level
5) Warehouse control system: namely WMS/WCS warehouse management system
6) Auxiliary equipment options: unpalletizing / palletizing robot, AGV, etc.
I hope the above answers can meet your requirements.
Application of principle and structure of palletizing robot
The palletizing robot is composed of:
1. Active control system: there are intelligent PLC and touch screen, which act as the center of the system, which is used to coordinate the orderly work among various subsystems, and to check the running status of system equipment and alarm information.
two。 Baffle device: the quantity value of the material reaching the grab is detected, and the material behind is blocked from continuing to transport.
3. Positioning device: the material transported by the conveyor belt is located, which is convenient for the robot to grasp.
4. Palletizing robot: complete the task of grabbing and palletizing materials
5. Pallet automatic lifting and conveying device: batch pallet is placed so that it is automatically sent to the designated position.
6. Safety fence: used to isolate the working area of the robot and protect personal safety.
Application workflow:
The movement mechanism of the palletizer robot enables the hand to complete all kinds of rotation (swing), movement or compound movement to achieve the prescribed action and change the position and posture of the grasped object. In order to grasp objects in any position and orientation in space, it needs 6 degrees of freedom. The degree of freedom is the key parameter designed by the manipulator. The more degrees of freedom, the greater the flexibility of the palletizing manipulator, the wider the versatility, and the more complex its structure. The general palletizing manipulator has 2-3 degrees of freedom. The control system completes the specific action by controlling the motor of each degree of freedom of the palletizing robot.
Robot palletizer can be integrated in any production line to provide intelligent, robotic and networked production site, and can realize palletizing logistics for a variety of operations in beer, beverage and food industries. It is widely used in cartons, plastic boxes, bottles, bags, barrels, membrane packaging products and filling products. It is equipped with three-in-one filling line to palletize all kinds of bottles and bags. The automatic operation of the palletizer can be divided into automatic box feeding, rotating box, separate arrangement, stacking, moving pile, lifting pile, into support, under stack, out of stack and other steps.
What are the types of palletizers?
Automatic palletizer systems are generally divided into the following three categories:
High position palletizer
Turn left | turn right
Yuzhuang YZ-HP high position palletizer
Fully automatic high position stacker
Video from: Youku
High position palletizer video
The high-position palletizer receives the palletizing products at a certain height or level above the pallet. Blank pallet from one
A silo or accumulation station goes down to the palletizer, where the machine stretches the pallet and positions it under a pallet; the product is loaded into a pallet and assembled into a layer or row.
The palletizer places the assembled product layer or product column on the pallet below them; then the palletizer continues to assemble the second layer of products, changing the arrangement format of the cartons to match the pallet format; after that, the pallet
And the first-tier product will go down one layer so that the second-tier product can be placed on the first-tier product. The pallet keeps falling.
Layer after layer of products continue to be high until the specified number is completed; the pallets then slowly descend to the ground level and are then transported to other sections by transporters or forklifts. Back and forth.
Middle and low position palletizer
Turn left | turn right
Yuzhuang YZ-LP low position palletizer
Mengniu milk automatic palletizer
Video from: Youku
Low position palletizer video
Middle and low position palletizer: the situation of middle and low position palletizer is similar to that of high position stacker. It’s just that the pallets on the middle and low position pallets do not need to be raised.
High and low, the product layer and product line are formed at a level close to the ground. Each layer of products is made on a tray.
After the shape, then lift it and place it on a fixed pallet. After that, the tray goes back to the starting point to load the next layer of products. Goods
After the tray is loaded, the palletizer unloads it, and another blank pallet replaces its original position, and so on.
Robotic palletizer
Turn left | turn right
Yuzhuang YZ-RP robot palletizer
The mechanical hand palletizer is self-contained.
Video from: Youku
Robot palletizer video
Robotic palletizer: a robotic palletizer is often seen as a grab and placement system, which can be obtained from one or more locations.
Grab one or more cartons and place them in a pre-set location on the pallet. Basic computing power, plus
Sensors can be integrated to identify product changes, making the robot palletizer an intelligent system that can identify and distinguish a variety of products.
Products; a robot can automate multiple production lines, arranging the shipping ports of multiple production lines next to a robot station, and the robot can identify and process a variety of products; robot palletizing can also produce pallets of different sizes and shapes.
What is the palletizing robot for?
Palletizing robot is a kind of palletizing equipment on the production line. The manipulator and the main body of the fuselage can rotate accurately 360 °horizontally in three-dimensional coordinates through the electronic control servo system and the central rotary device, the manipulator can rise and fall vertically and can grasp a variety of special-shaped building products into square palletizing, and the heavy-duty palletizing robot can grasp code load up to 600 kg by using counterweight mass balance mode. it can fully meet the heavy-duty palletizing needs of blocks (bricks) and other related industries. This brand-new palletizing method will certainly replace the traditional longitude and weft palletizing equipment with complex structure, large volume and low efficiency, and take the lead in introducing palletizing robot in the block equipment industry, which has high promotion value and promising market prospect. From Silver Horse experience
So much for the introduction of the electronic control system of the automatic palletizer. Thank you for taking the time to read the contents of this site. Don’t forget to look for more information about the manual control program of the palletizer and the electronic control system of the automatic stacker.