Mobile:

+86-177 7223 0517

New automatic paper cutter (automatic paper cutter automatically loading and unloading paper)

Article catalogue:

The full-automatic drum paper cutter can drive at low speed, but what is the reason for not moving at high speed?

The full-automatic drum paper cutter can drive at low speed, but the reason for not moving at high speed:

1. At low speed, when the knife cuts to the paper pile and stops, if you press the two-handed button again, the knife can continue to move until the end of a cycle, you can be sure that the hydraulic and mechanical parts are normal, there will be no big problems.

2. At high speed, the reason why the knife stops is mostly because the alignment of the photoelectric protection is in a critical state, and the vibration when the knife is put down causes the deviation of the infrared emitting and receiving signals (similar to blocking the photoelectric protection with the hand when cutting the knife).

3, open the high speed, press the two-handed button again can not continue cutting, then generally has nothing to do with the circuit, need to check to measure the cutting pressure of the auxiliary pump or other mechanical reasons.

Could you tell me how to deal with the oil leakage of the automatic paper cutter?

Generally speaking, full-automatic paper cutter, full-automatic CNC paper cutter, CNC paper cutter and electric paper cutter all have the problem of oil leakage. Although the machine can work normally when there is oil leakage, it is also a waste due to the leakage of machine oil. For this problem, some users think that as long as the resin oil seal and skeleton oil seal of several parts such as worm and hydraulic valve can be replaced, but after several changes, the oil leakage problem of some automatic paper cutters still exists. did not achieve the desired anti-leakage effect. For this problem, the manufacturer pointed out that attention should be paid to the quality of the replaced sealing ring, and the sealing ring that has been in stock for a long time will also age and deteriorate, which can easily lead to machine leakage again and affect the sealing effect of the paper cutter. Therefore, it is necessary to remind you that when replacing the sealing ring of the paper cutter, it is best to pay attention to its quality and the degree of new and old, so as to avoid the problem of oil leakage again and again.

6720d54a4cdf7

When can I use the automatic paper cutter? will I be fully automatic if I don’t need any hands?

At present, there is no such advanced paper cutter!

At present, the automatic paper cutter we are talking about is the so-called automatic paper pushing, automatic paper pressing and automatic cutting, which is still a long way from what you are talking about.

Program control and numerical control are actually numerical control type, but program control is more intelligent than numerical control, for example, it can remember many groups of cutting data, and the next time it needs to be used, it can be directly used, and the display screen is different!

These are basically the differences!

How much is a fully automatic toilet paper sawing machine?

The fully automatic band saw paper cutter adopts computer-controlled programming technology, frequency conversion and speed regulation technology to ensure a cutting output of 160-200 per minute, automatic stop of photoelectric detection end saw blade, photoelectric induction paper pressing, photoelectric counting, servo motor pulse signal paper cutting and other functions. The paper cutting length can be adjusted at will, so that the deviation error is 0.2mm, the length error is 0.5mm, and the minimum side material can be cut 10mm, which can greatly reduce the labor intensity, the processing speed is fast, and the workers are safe. The price varies from tens of thousands of yuan.

This is the end of the introduction of the new automatic paper cutter. Thank you for taking the time to read the contents of this site. Don’t forget to look for more information about the automatic paper cutter and the new automatic paper cutter.

Related Posts
Manipulator (manipulator picture)

Article catalogue: 1 、What are the main types of manipulators? 2 、What kind of motor does the robotic arm use? 3 、What is the control

GET IN TOUCH WITH YANMAO
Contact Form Demo (#3)
GET IN TOUCH WITH YANMAO
Contact Form Demo (#3)