A list of the contents of this article:
- 1 、What are the specifications of the winding machine? Which performance service is good?
- 2 、Brief introduction of Winding Machine
- 3 、Working principle of palletizer
- 4 、What are the ways to choose the winding machine?
What are the specifications of the winding machine? Which performance service is good?
Classification of winding packaging equipment
1. According to the different stretching methods of winding packaging equipment, winding films can be divided into two categories: “pre-stretching” and “anti-stretching”.
1. Pre-stretched winding machine: it refers to wrapping the winding film on the pallet goods after stretching the winding film according to the pre-set “drawing ratio” through the pre-stretching film frame mechanism. The utility model has the advantages of uniform exhibition film, beautiful packaging, strong adaptability (ultra-light, ultra-high goods can be used), and 30% less consumable materials than the “stretch resistance” type under the same conditions.
2. Tension-resistance winding machine: it means that by adjusting the friction damping of the resistance-tension mechanism, the speed of the winding film passively pulled out is slower than that of the pallet goods, and then wrapped around the goods at the same time when the winding film is pulled away. Because the damping can be adjusted to “zero”, winding film or ordinary plastic film of any quality can be used, but for lighter and higher goods, stable packaging can not be achieved and film consumption is high.
Second, according to the application field of winding packaging equipment and the different packaging methods of goods, it can be divided into seven series and various extended specifications:
1. T series-pallet (pallet) winding packaging machine:
It refers to the equipment that rotates the pallet goods through the rotation of the turntable, and then realizes the winding and wrapping of the goods. It is suitable for the packaging of goods shipped by pallets (such as container transportation of bulk goods and packing of bulk pallets, etc.), and is widely used in glass products, hardware tools, electronic and electrical appliances, paper, ceramics, chemical, food, beverage, building materials and other industries. It can improve the logistics efficiency and reduce the loss in the process of shipment. It has the advantages of dustproof, moistureproof, reducing packaging cost and so on.
2. R series-cantilever winding packaging machine:
It refers to the equipment that wraps and wraps the goods by rotating the cantilever that can rotate around the goods. All T series packable goods can be wrapped with R series equipment. In addition, the rotating packaging mode is more suitable for the packaging of lighter, higher and unstable products or overweight goods. The installation mode of the machine is flexible, can be placed on the wall, can also be fixed by bracket, and can be connected with the transmission line according to the needs to meet the needs of assembly line operation.
3. H series-ring winding packaging machine:
It refers to the equipment that wraps the ring part of the ring goods through the film feeding device running around the circular track. It is used in tire, bearing, strip, copper, cable and other industries. It can improve the packaging efficiency and has the advantages of dustproof, moistureproof, reducing packaging cost and so on.
4. Y Series-Cylindrical Axial Winding packing Machine:
It means that the whole rotation of the cylindrical goods is driven by the rotation of the turntable, and the rotation of the cylindrical goods is driven by the two power rollers on the turntable, so as to realize the fully closed winding and wrapping of the goods. Suitable for sealed packaging of all kinds of cylindrical goods, used in papermaking, cord fabric, non-woven and other industries. It can improve the logistics efficiency, reduce the loss in the process of shipment, and has a good isolation effect of dust and moisture.
5. W series-cylindrical radial winding packaging machine:
It refers to the packaging equipment which rotates the reel-shaped goods through two power rollers on the turntable so as to realize the winding and wrapping of the radial cylinder surface. It is suitable for spiral wrapping on the round surface of drum-shaped objects, and it is used in papermaking, cord fabric, non-woven fabric and other industries. It can improve the logistics efficiency, reduce the loss in the process of shipment, and has the advantages of dustproof, moisture-proof, reducing packaging cost and so on.
6. S series-horizontal winding packaging machine:
It refers to the equipment that rotates the goods moving around the horizontal uniform speed through the rotary arm system, adjusts the rising force of the packaging material through the stretching mechanism, packages the object into a tight whole, and forms a spiral regular packaging on the surface of the object. Used in plastic profiles, aluminum, plates, pipes, dyed fabrics and other industries. It can improve the packaging efficiency, reduce the loss in the process of shipment, and has the advantages of dustproof, moisture-proof, reducing packaging cost and so on.
7. NT series-non-pallet winding packaging machine:
It refers to the equipment which drives the rotation of the goods through the rotation of the turntable so as to realize the winding and wrapping of the goods. It is suitable for the packaging of one or more small size goods. Used in clothing, electrical appliances, chemical fiber and other industries. It can improve the packaging efficiency, reduce the loss in the process of shipment, and has the advantages of dustproof, moisture-proof, reducing paper packaging cost and so on.
Brief introduction of Winding Machine
Winding machine can be divided into pallet winding machine, non-pallet winding machine, horizontal winding machine and so on. 1. T series-pallet winding machine:
It refers to the equipment that rotates the pallet goods through the rotation of the turntable, and then realizes the winding and wrapping of the goods. It is suitable for the packaging of goods shipped by pallets (such as container transportation of bulk goods and packing of bulk pallets, etc.), and is widely used in glass products, hardware tools, electronic and electrical appliances, paper, ceramics, chemical, food, beverage, building materials and other industries. It can improve the logistics efficiency and reduce the loss in the process of shipment. It has the advantages of dustproof, moistureproof, reducing packaging cost and so on.
2. R series-cantilever winding machine:
It refers to the equipment that wraps and wraps the goods by rotating the cantilever that can rotate around the goods. All T series packable goods can be wrapped with R series equipment. In addition, the rotating packaging mode is more suitable for the packaging of lighter, higher and unstable products or overweight goods. The installation mode of the machine is flexible, can be placed on the wall, can also be fixed by bracket, and can be connected with the transmission line according to the needs to meet the needs of assembly line operation.
3. H Series-Ring Winding Machine:
It refers to the equipment that wraps the ring part of the ring goods through the film feeding device running around the circular track. It is used in tire, bearing, strip, copper, cable and other industries. It can improve the packaging efficiency and has the advantages of dustproof, moistureproof, reducing packaging cost and so on.
4. Y series-cylindrical axial winding machine:
It means that when the turntable rotates to drive the whole rotation of cylindrical goods, it is suitable for the sealed packaging of all kinds of cylindrical goods, and is used in papermaking, cord fabric, non-woven fabric and other industries. It can improve the logistics efficiency, reduce the loss in the process of shipment, and has a good isolation effect of dust and moisture.
5. W series-cylindrical radial winding machine:
It refers to the packaging equipment which rotates the reel-shaped goods through two power rollers on the turntable so as to realize the winding and wrapping of the radial cylinder surface. It is suitable for spiral wrapping on the round surface of drum-shaped objects, and it is used in papermaking, cord fabric, non-woven fabric and other industries. It can improve the logistics efficiency, reduce the loss in the process of shipment, and has the advantages of dustproof, moisture-proof, reducing packaging cost and so on.
6. S series-horizontal winding machine:
It refers to the rotational motion around the goods moving at a horizontal and uniform speed through the rotary arm system. Used in plastic profiles, aluminum, plates, pipes, dyed fabrics and other industries.
7. NT series-non-pallet winding machine:
It refers to the equipment which drives the rotation of the goods through the rotation of the turntable so as to realize the winding and wrapping of the goods. It is suitable for the packaging of one or more small size goods. Used in clothing, electrical appliances, chemical fiber and other industries. It can improve the packaging efficiency, reduce the loss in the process of shipment, and has the advantages of dustproof, moisture-proof, reducing packaging cost and so on. 1. The running structure of the winding machine is stable.
two。 Digital electronic control loop, high stability, long life, low failure rate.
3. Start and stop the device slowly to prevent the upper packing from falling.
4. Touch screen, easy to operate.
5. The number of packaging layers at the upper and lower ends can be set by entering data.
[1] wrapping machine is also known as winding packaging machine, winding machine. in order to meet the packaging requirements of goods containerized storage, transportation and mechanized loading and unloading operations, a series of products of pallet winding machine, pressure-top resistance winding machine and pre-drawing automatic film winding machine are designed and manufactured. It is widely used in the assembly cost of foreign trade exports, food and beverage, irrigation, papermaking, dyes, plastic chemicals, glass ceramics, mechanical and electrical castings and other products.
The working principle of the winding machine is to place the wound object in the center of the turntable, start the turntable motor to rotate, and naturally drive the turntable to rotate, so that the object can realize the peripheral winding film machine. At the same time, the lift motor also starts, driving the whole assembly of the winding and binding machine to move up and down to achieve the winding in the height direction of the object, which realizes the winding packaging of the whole appearance of the object. This is not only conducive to the packaging requirements of goods storage, transportation and mechanized loading and unloading operations, but also prevent the damage of goods in the handling process, play the role of dustproof, moisture-proof and cleaning, but also reduce production costs and improve production efficiency. In the winding process, the main thing is to adjust the tension of the film and penetrate the film. Generally, the degree of film tension can be achieved by adjusting the speed of the turntable and the speed of the motor. As long as you know that the rotating speed of the turntable is greater than the speed of the motor, the tighter the film will be, and the looser the principle is, it is not difficult to operate.
Working principle of palletizer
The palletizer is to put the cartons that have been packed into containers on pallets and pallets (wood, plastic) according to a certain arrangement code, which can be stacked automatically, which can be stacked in multiple layers, and then pushed out to facilitate forklift transportation to the warehouse for storage. This equipment adopts PLC+ touch screen control to realize intelligent operation and management, which is simple and easy to master. The labor force and labor intensity can be greatly reduced. The palletizer is the equipment in which the bags, cartons or other packaging materials transported by the conveyor are automatically stacked and transported according to the working mode required by the customer.
How it works:
A layer of workpieces on the plate that meet the requirements of the pallet, and the plate and the workpiece move forward until the vertical surface of the pallet. The upper stopper rod drops, the other three sides position the stopper bar to start and clamp, and the plate resets at this time. Each workpiece falls to the pallet plane, the pallet plane is 10mm away from the bottom of the plate, and the pallet drops one workpiece height. Repeat the above until the pallet stack meets the set requirements.
What are the ways to choose the winding machine?
1. According to the different stretching methods of the winding film, it can be divided into two categories: “resistance stretching” type and “pre-stretching” type: 1, the pre-stretching winding machine refers to the pre-stretching film rack mechanism, the winding film is stretched according to the pre-set “stretching ratio” and wrapped around the pallet goods. The utility model has the advantages of uniform exhibition film, beautiful packaging, strong adaptability (ultra-light, ultra-high goods can be used), and 30% less consumable materials than the “stretch resistance” type under the same conditions. 2. Tension-resistance winding machine: it means that by adjusting the friction damping of the resistance-tension mechanism, the speed of the winding film passively pulled out is slower than that of the pallet goods, and then wrapped around the goods at the same time when the winding film is pulled away. Because the damping can be adjusted to “zero”, winding film or ordinary plastic film of any quality can be used, but for lighter and higher goods, stable packaging can not be achieved and film consumption is high. Second, according to the application field of winding packaging equipment and the different packaging methods of goods, it can be divided into seven series and various extended specifications: 1. T series-pallet (pallet) winding packaging machine: it refers to the equipment that drives the rotation of pallet goods through the rotation of the turntable, so as to realize the winding and wrapping of goods. It is suitable for the packaging of goods shipped by pallets (such as container transportation of bulk goods and packing of bulk pallets, etc.), and is widely used in glass products, hardware tools, electronic and electrical appliances, paper, ceramics, chemical, food, beverage, building materials and other industries. It can improve the logistics efficiency and reduce the loss in the process of shipment. It has the advantages of dustproof, moistureproof, reducing packaging cost and so on. 2. R series-cantilever winding packaging machine: it refers to the equipment which rotates around the goods through a rotatable cantilever to realize the winding and wrapping of the goods. All T series packable goods can be wrapped with R series equipment. In addition, the rotating packaging mode is more suitable for the packaging of lighter, higher and unstable products or overweight goods. The installation mode of the machine is flexible, can be placed on the wall, can also be fixed by bracket, and can be connected with the transmission line according to the needs to meet the needs of assembly line operation. 3. H series-ring winding packaging machine: it refers to the equipment for winding and wrapping the ring part of the ring goods through the film feeding device running around the circular track. It is used in tire, bearing, strip, copper, cable and other industries. It can improve the packaging efficiency and has the advantages of dustproof, moistureproof, reducing packaging cost and so on. 4. Y series-cylindrical axial winding packaging machine: it means that the whole rotation of the cylindrical goods is driven by the rotation of the turntable, and the rotation of the cylindrical goods is driven by two power rollers on the turntable, so as to realize the fully closed winding and wrapping of the goods. Suitable for sealed packaging of all kinds of cylindrical goods, used in papermaking, cord fabric, non-woven and other industries. It can improve the logistics efficiency, reduce the loss in the process of shipment, and has a good isolation effect of dust and moisture. 5. W series-cylindrical radial winding packaging machine: it refers to the packaging equipment which rotates the reel-like goods through two power rollers on the turntable to realize the winding and wrapping of the radial cylinder surface. It is suitable for spiral wrapping on the round surface of drum-shaped objects, and it is used in papermaking, cord fabric, non-woven fabric and other industries. It can improve the logistics efficiency, reduce the loss in the process of shipment, and has the advantages of dustproof, moisture-proof, reducing packaging cost and so on. 6. S series-horizontal winding packaging machine: it refers to the rotating movement around the goods moving at a horizontal and uniform speed through the rotary arm system, while adjusting the rising force of the packaging material through the stretching mechanism, packaging the object into a tight whole, and form spiral regular packaging on the surface of the object. Used in plastic profiles, aluminum, plates, pipes, dyed fabrics and other industries. It can improve the packaging efficiency, reduce the loss in the process of shipment, and has the advantages of dustproof, moisture-proof, reducing packaging cost and so on. 7. NT series-non-pallet winding packaging machine: refers to the equipment that rotates the goods through the rotation of the turntable, and then realizes the winding and wrapping of the goods. It is suitable for the packaging of one or more small size goods. Used in clothing, electrical appliances, chemical fiber and other industries. It can improve the packaging efficiency, reduce the loss in the process of shipment, and has the advantages of dustproof, moisture-proof, reducing paper packaging cost and so on. Third, according to the characteristics of the above winding machines and their respective scope of application, customers can choose the winding equipment suitable for their own products.
So much for the introduction of the palletizing goods winding machine. Thank you for taking the time to read the contents of this site. Don’t forget to look for more information about the function of the palletizing goods winding machine and the palletizing goods winding machine on this site.