Top & Bottom Adhesive Sealer

This case sealer adopts a stylish stainless steel plate structure, which is not easy to rust and does not need to be sprayed.

Fully transparent gullwing doors are standard, not special order. They are electrically interlocked to stop the case sealer when opened and allow full access to the equipment.

The stainless steel plate structure of this type of case sealer is welded and screwed to increase the compressive strength, and the upper operating mechanism is stabilized on the frame with a solid rack and pinion system.

Gross weight in excess of 2,200 pounds (excluding compression) and is designed to tackle the toughest production conditions.

China Yanmao’s exclusive flying lugs shove each case down the corner, aligning it on the move. The cast aluminum flip-folder slowly takes shape, folds the flip at the score line, and then closes smoothly without the flip-up. Even boxes with undefined can be folded squarely and securely.

The compression section is a separate module containing a dual drive belt case transmission driven by a 1hp motor to ensure good case transmission. The top drive belt is supported by torsion spring loaded rollers and can be adjusted for different box heights to achieve a uniform seal.

Shell size conversion is very simple. First, place a new case at the feed inlet and use the manual gears to adjust to the height and width of the new case.

Adjustments can be made from either side of the case sealer. Next, set a new glue pattern on the electronic glue timer. After a few minutes, the case sealer was back in production.

The robust construction of the hot melt carton sealer is your guarantee to operate longer with less damage or maintenance. However, this powerful case sealer has extra features to minimize your maintenance tasks.

The main drive gear components are enclosed in a lubricating oil bath to remove drive gear damage. Sealed bearings and self-lubricating cylinders never have to be maintained. An automatic water eliminator prevents water in the air line from damaging the air valve.

When routine maintenance or cleaning is required, the gull-wing doors can be opened to allow access to all equipment.