Mobile:

+86-177 7223 0517

Stacker structure (picture of stacker)

A list of the contents of this article:

Structural characteristics of palletizer

The middle and low position palletizer is mainly composed of flattening conveyor, slow stop conveyor, indexable conveyor, pallet silo, pallet conveyor, marshalling machine, pouch pushing device, palletizing device and palletizing conveyor. Its structural design is optimized and its action is stable and reliable. The palletizing process is completely automatic and does not require human intervention in normal operation, so it has a wide range of application.

655e1e7ec08a9

The difference between high position stacker and low position palletizer

One is a single palletizing in the high position, neatly placed, and the other is in the low position, a combination of several palletizing.

What factors need to be considered in the palletizing process?

The choice of warehouse has a great impact on the later operation of enterprises, and it is also the beginning of operation planning and layout. Many enterprises, especially those with rapid development, still rely on experience and feeling in choosing warehouse. The emphasis on immediate demand and the lack of long-term planning consciousness caused some limitations for the warehouse operation planning in the later stage.

Today, I would like to share with you several aspects that need to be considered in the location of the warehouse.

The location of the warehouse should follow three standards and two factors. First of all, let’s talk about the three criteria for warehouse location: basic standards, rigid standards, and room for appreciation.

First, the basic standards are the basic requirements for warehouse location. The more basic requirements are met, the more convenient the operation will be.

01

Transportation capacity

Warehouse logistics center must have convenient transportation conditions, preferably close to the transportation hub for layout. Close to the port, trunk road hub, railway marshalling yard or airport, there are more than two modes of transportation connected.

02

Surrounding public facilities

The location of the warehouse logistics center requires that the city’s roads, communications and other public facilities are complete, with adequate power supply, water, heat and gas capacity; the surrounding facilities can ensure the office and living problems of warehouse operators.

03

The warehouse is a flat layout.

The closer the warehouse is to the square, the better the layout, and the higher the operation efficiency. The storehouse needs to focus on the layout, the flow of goods upstairs and downstairs, as well as the renovation space of the storehouse.

04

Fire fighting facilities

The warehouse has fire-fighting facilities to meet the fire-fighting needs, and has the fire-fighting acceptance certificate of the fire department.

05

Requirements for warehouse posts

The columns in the reservoir had better be as few as possible, and the absolute parallelism of the columns should be ensured to facilitate the planning of the reservoir area and the rational use of the space in the reservoir area; parallel wire ropes should be drawn above the pillars to facilitate the suspension of lighting equipment at night.

Second, the rigid standard is the condition that must be met in the location of the warehouse, and only when these conditions are met can the warehouse have room for promotion.

1. Ground requirement

The ground should be hard, preferably epoxy floor, so as to facilitate the use of operating tools in the warehouse, reduce the production of dust and impurities, facilitate sanitary finishing and ensure the quality of the goods in the warehouse.

two。 Warehouse height

The warehouse should be high enough to facilitate the construction of shelves and guard against theft; to ensure the lighting of the warehouse, there should be lighting panels at the top and around the warehouse to facilitate daytime work and save money.

3. Support for network installation

4. Warehouse platform

The warehouse is preferably a circular platform, and the minimum requirements are bilateral platforms to facilitate the handling of goods; the height of the platform should be consistent with the height of the company’s vehicles to facilitate operation; the platform is equipped with rain-proof facilities to ensure the quality of goods handling.

5. The warehouse needs to have the relevant qualification certificate of business license and land use license.

Third, room for appreciation. Can the warehouse still have room for appreciation? The appreciation space mentioned here is not only the appreciation space of the real estate industry, but also depends on the availability of the warehouse.

Classification of palletizers

According to the intelligent level, automatic palletizer can be divided into two types: robot palletizer and mechanical palletizing. Mechanical palletizer can be divided into: gantry stacker, column stacker, mechanical arm stacker.

Automatic palletizer according to the industry is divided into: food and beverage industry palletizing, cement automatic loading palletizer, industrial products stacker and so on.

What are the types of palletizers and maintenance kilns? Which manufacturer has developed better equipment?

The assembly line of prefabricated PC components usually needs to be equipped with palletizers and maintenance kilns. The function of the palletizer is to store and remove concrete components into and out of the maintenance kiln. The function of the maintenance kiln is to speed up the solidification speed of cement through appropriate temperature and humidity control (but only need 1 stroke 3 of the natural solidification time), prevent the cracking of cement components, and the occupation area of components can be greatly reduced by using three-dimensional way.

According to the different ways of grasping the mold table, the palletizer can be divided into holding type and pick-up type. According to the different curing medium, the maintenance kiln is divided into hot water curing and steam curing, generally using steam curing.

Domestic Zhuyou equipment, Sany heavy Industry, New Land and other manufacturers can provide these equipment.

This is the end of the introduction of the structure of the stacker. Thank you for taking the time to read the contents of this site. Don’t forget to look up the pictures and structure of the stacker in this site.

Related Posts
GET IN TOUCH WITH YANMAO
Contact Form Demo (#3)
GET IN TOUCH WITH YANMAO
Contact Form Demo (#3)