Article catalogue:
- 1 、A collection of common stacking methods for goods in warehouses
- 2 、What are the stacking methods of the goods in the warehouse?
- 3 、What are the common stacking methods in the warehouse, their respective characteristics and ways of use?
- 4 、What are the stacking methods of goods in the warehouse?
A collection of common stacking methods for goods in warehouses
There are many ways of stacking goods, and different stacking methods are selected according to the characteristics of commodities. The common technical methods of stacking commodities are straight code, seam code, cross code, serial code, plum blossom code and so on. It is necessary to determine the stacking form of goods according to the variety, nature, packaging, volume and weight of the goods, as well as the specific storage requirements of the warehouse and conducive to the management of the goods warehouse, so as to be scientific and reasonable.
Reasonable stacking of goods plays a good role in the larger storage of goods in the warehouse space. Let’s take a look at the common stacking methods of goods:
1. Bulk stacking method
Bulk method is a way to store unpackaged bulk goods directly into the port of cargo. It is especially suitable for open storage of unpackaged bulk goods, such as coal, ore, bulk grain and so on. This reduction method is simple, convenient to use modern large-scale machinery and equipment, saves packaging costs and improves the utilization rate of warehouse capacity.
two。 Stacking method
The stacking method is generally adopted for packaged goods and naked piecework goods. The specific ways are: stacking type, seam type, crisscross type, ventilation type, column type, pitching type and so on. The selection of the stacking mode of the goods mainly depends on the nature, shape, volume, packaging and so on. In general, more flat (lying), so that the center of gravity is reduced, the maximum contact is facing down, so that it is easy to stack, and the stack is stable and firm.
3. Shelf method
Shelf method is the direct use of general or special shelves for stacking goods. This method is suitable for storing small pieces, high value, fragile or fragile goods, such as department stores, hardware, pharmaceuticals, etc., which are not suitable for heap height and require special custody.
4. Group stacking method
The group stacking method adopts pallet, pallet, grid and other group tools to expand the storage unit of goods, generally based on the principle of dense, stable and multi-loading, and the combination units of the same kind of goods should be the same. This method can improve the utilization rate of warehouse capacity, realize the safe handling and storage of goods, and is suitable for semi-mechanized and mechanized operations. Improve labor efficiency and reduce damage and shortages.
What are the stacking methods of the goods in the warehouse?
1. Horizontal and vertical rows
2. Circle around the warehouse, and then line up horizontally or vertically in the middle
3. Generally stacked into a tower
4. Bulk goods should be made into shelves
5. Bulk goods are arranged according to regular rectangles or rectangles.
What are the common stacking methods in the warehouse, their respective characteristics and ways of use?
The stacking methods of goods include stacking method, bulk method and shelf stacking method. The stacking forms are: flat stacking, ridged stacking, pagoda stacking and so on.
Goods of variety, origin, grade and unit price shall be stacked separately for receiving, sending and safekeeping. The height of the stack should be moderate, do not crush the goods and floor on the ground floor, and keep a certain distance from the roof and lights; the distance between the stack, the width of the aisle, the distance between the stack and the wall, beams and columns, etc., should be reasonable and moderate. The stacking distance is generally 0.5-0.8m, and the main channel is 2.5-3m.
1. Convenience. The number of stacking lines, layers, and strive to be an integer, easy to count, send and receive operations. If the weighed goods are not integers, the weight should be indicated in layers.
2. Neat. The stacks should be stacked according to certain specifications and sizes, neatly arranged and standardized. The packaging signs of the goods should all face outward so that they can be easily found.
3. Economize. When stacking, attention should be paid to saving space, properly and reasonably arranging the use of cargo space, and improving the utilization rate of warehouse capacity.
The main principles of commodity stacking are:
1. Make use of the storage space as much as possible, and adopt the way of three-dimensional storage.
2. Maintain a proper width and distance between the warehouse passage and the stacking to improve the efficiency of loading and unloading.
3. According to the requirements of different sending and receiving batches, packaging shapes, properties and inventory methods, different stacking forms are adopted by using different stacking tools, in which the stacking of dangerous goods and non-dangerous goods, the goods whose nature contradicts each other should be distinguished and must not be confused.
4. Do not easily change the storage location of items, mostly in accordance with the principle of first-in, first-out.
5. under the condition that the storage location is not tight, try to avoid the covering and crowding of goods stacking.
Extended data
The five distances of the stack of goods
The commodity stack should keep a certain distance between the goods stack and the wall and column, and leave a suitable channel for the handling, inspection and maintenance of the goods. “five distances” is very important to take good care of the goods. The fifth distance refers to the top distance, lamp distance, wall distance, column distance and stacking distance.
The top distance refers to the distance between the top of the stack and the roof plane of the warehouse. Leave the top distance is mainly for ventilation, close to the top building, the top distance should be more than 50 cm.
The lamp distance refers to the separation between the lights in the warehouse and the goods. The distance between the lamp and the lamp is mainly to prevent fire. The distance between the commodity and the lamp should not be less than 50 centimeters.
The distance from the wall refers to the distance between the stack and the wall. The main purpose of keeping the distance between the walls is to prevent water seepage and to facilitate ventilation and tide dissipation.
Column spacing refers to the distance between the stacks and the pillars. The column spacing is 10-20 cm per share in order to prevent the goods from getting damp and protect the feet.
Stacking distance refers to the distance between the stacking and the stacking. The pile spacing is to facilitate ventilation and inspection of goods, generally leaving 10 centimeters.
Source: Baidu Encyclopedia-Commodity stacking Code
What are the stacking methods of goods in the warehouse?
The general stacking methods are: overlapping type, crisscross type, upside down type, seam type, pagoda type, ventilated type, pillar type, cushion type, Wuhua type, container type.
The common ones are as follows:
Line up horizontally and vertically
Circle around the warehouse and then line up horizontally or vertically in the middle
Generally stacked into a tower
Bulk goods should be made into shelves.
Bulk goods are arranged in regular rectangles or rectangles
This is the end of the introduction of the ten stacking methods of the warehouse and the ten stacking methods of the warehouse. I wonder if you have found the information you need? If you want to know more about this, remember to collect and follow this site.