A list of the contents of this article:
- 1 、Can I take 120 grams of toothpaste on the high-speed train?
- 2 、Can toothpaste be shipped by sea?
- 3 、Toothpaste production process
- 4 、The supermarket waiter wants to tie 18 boxes of toothpaste together. How to tie the most economical tape?
Can I take 120 grams of toothpaste on the high-speed train?
120 grams of toothpaste can be carried on the high-speed train. Toothpaste is not contraband.
The regulations on Railway passenger Transport stipulate that:
Article 52 the following articles shall not be brought into the vehicle:
1. Articles prohibited or restricted by the State
2. Dangerous goods, ammunition and chemical products that cannot be identified by the carrier as stipulated in laws, regulations and rules
3. Animals and articles that interfere with public health (including odors, etc.)
4. Articles capable of damaging or polluting vehicles
5. The specification or weight exceeds the articles specified in Article 51 of these regulations.
In order to facilitate passengers’ travel and life, the following items are limited to be carried:
1. 5 gas lighters and 20 small boxes of safety matches.
2. Nail polish, polish remover, hair dye not more than 20ml. No more than 100 ml of alcohol and cold scalding essence. No more than 600ml mousse, hair gel, sanitary insecticide, air freshener.
3. Soldiers, armed police, public security personnel, militia and hunters shall prove the guns and bullets they carry on the basis of the guns prescribed by laws and regulations.
4. 20 newborn chicks.
Extended data
The regulations on the Administration of Railway Safety stipulates that:
Article 66 passengers shall accept and cooperate with the safety inspections carried out by railway transport enterprises at stations and trains, and shall not illegally carry or carry control instruments, or illegally carry or consign dangerous articles such as fireworks, firecrackers, guns and ammunition or other prohibited articles.
The types and quantities of articles prohibited or restricted shall be prescribed by the railway industry supervision and administration department under the State Council in conjunction with the public security organs and announced at stations, trains and other places.
Article 67 in the consignment of goods, luggage and parcels by railway transport, the consignor shall not commit any of the following acts:
(1) reporting anonymously or falsely stating the name, nature and weight of the goods
(2) carrying dangerous goods in ordinary goods, or goods that are prohibited from loading among dangerous goods
(3) loading and packing exceeding the prescribed weight.
Article 68 A railway transport enterprise shall carry out safety inspection of the goods carried and shall not commit any of the following acts:
(1) to go through the formalities for the carriage of dangerous goods at the non-dangerous goods handling station
(2) to carry goods that have not been subject to safety inspection
(3) to carry goods that do not comply with the safety regulations and may endanger the safety of railway transport.
Source: railway customer Service Center-Railway passenger Transport regulations
Can toothpaste be shipped by sea?
Toothpaste is not dangerous goods, if it is in bulk, it is recommended to rent ISO TANK liquid bulk container for shipment.
If the price is too high, it can be packed in a 20-foot standard container in disposable liquid bags. But there may be some trouble in unloading the goods. It is best to ask a forwarder who specializes in chemical trade.
Oh, I don’t know if it’s a sample. You can ask DHL.
I know a company that specializes in the international transportation of dangerous chemicals called Dijem.
They can send test reports for mailed chemicals to facilitate export. But the charge is higher. Suitable for mailing samples
Toothpaste production process
Summary of toothpaste production process
1 ointment preparation process
It is divided into steps such as metering feeding, glue making, paste kneading, grinding, vacuum degassing, aging and so on. The two-step production process is adopted, and the above steps are completed in the same paste pot.
According to the process formula, the spices, active additives, stabilizers and saccharin are dissolved evenly in the pre-dissolving pot or premixing pot with pure water, and then added to the paste-making pot, and then the liquid material in the liquid material storage tank is measured and added to the paste-making pot, and then the powder is added; after the powder is added, spices are added, scraper stirring, homogenizing stirring, grinding Because air bubbles will be produced in the paste during kneading and grinding, it is necessary to vacuum at the same time until the vacuum reaches-0.096Mpa, the time is about 50 minutes. The kneading effect makes the paste fully mixed evenly, and the grinding purpose makes the paste delicate. After kneading and grinding, a small amount of paste is tested and qualified, and then put into the paste storage pot for aging, so that the material is naturally cooled to room temperature, and at the same time, the material is fully expanded to form a homogeneous adhesive body to improve the elasticity of the material. The aging time is about 120 minutes. In the process of making paste, because of the friction and heat release in the process of kneading and grinding, the jacket cooling water is needed to control the temperature ≤ 45 ℃ in summer.
2 filling and packaging process
The filling is divided into two parts: paste filling and finished product packaging, which is completed on the automatic filling line. In the filling process, the filling volume, sealing temperature and machine speed should be adjusted, and the weight and sealing quality of toothpaste should be checked regularly. After the filling is finished, the finished products are then treated commercially, such as automatic packing, shrink film heat sealing, packing and so on, and the shrinkage temperature and machine speed should be adjusted in the packaging process. Pay attention to check the consistency of the quality and variety of packaging materials, and pay special attention to prevent the phenomenon of empty traffic control and empty boxes. After the end of packaging, stack them according to variety and time, carry out inspection, and then store them in storage after they are qualified.
The supermarket waiter wants to tie 18 boxes of toothpaste together. How to tie the most economical tape?
There are two suggested methods:
1. Put three toothpaste boxes in a row, in six rows, and put them into a square from the side (the side is similar to the picture below). The tape only needs to go around the edge of the square (below, red line track) to OK.
As shown in the figure:
Advantages: low packing and handling cost
Disadvantages: it is only suitable for short-distance transportation, and may lead to deformation and damage of the outer package.
2. Packing and sealing.
Advantages: convenient handling, not afraid of long-distance transportation, more protection, outer packaging is not easy to damage and deformation, and save tape
Disadvantages: extra cartons are needed, and the packing cost increases slightly.
This is the end of the introduction about toothpaste packing and foreign toothpaste packaging. I wonder if you have found the information you need? If you want to know more about this, remember to collect and follow this site.