Article catalogue:
- 1 、What kind of equipment is the top laminating machine of the winding machine and how does it work?
- 2 、Mechanical principle of binding machine
- 3 、Brief introduction of Winding Machine
- 4 、How does the wire harness winding machine AT-101 work? How does it drive? Guys, help! Thank you!
- 5 、Working principle of heating wire winding machine
What kind of equipment is the top laminating machine of the winding machine and how does it work?
The ordinary winding packaging machine can only winding the four sides of the goods, and the top and bottom generally can not be wound and packaged at the same time. The emergence of the laminating machine has effectively solved this problem. Suzhou Jiachuang
When in use, the equipment of the top laminating machine places the film roll on the film discharge roller of the lifting frame, raising the lift to the working height, and the film discharge roller rotates through the RV50 reducer and the sprocket chain, thus making the film roll rotate and discharge the film. The film clamps the film through the action of cylinders 1 and 2. Then the RV40 reducer of the conveyer frame starts to run, and the sliding unit is driven by the sprocket chain transmission mechanism to transport the film forward. when the sliding unit carries the film to the other end of the frame, the cylinders 3 and 4 begin to clamp the end of the film. At this time, cylinders 1 and 2 move to release the transmission film, quickly return to the original position before work, and tighten the film transmission, and then, the hot break film cylinder 5 and 6 move downward at the same time to break the film, and then the cylinder 3 and 4 relax the film transmission, and the film is covered on the top of the article. The film is covered for the next cycle.
Mechanical principle of binding machine
The binding machine can be divided into semi-automatic binding machine and automatic binding machine, and its working principle is simpler than that of winding machine. A bundling machine (baling machine) is a machine that uses straps to wind a product or package, then tightens and connects both ends by thermal effect melting or using materials such as clasps. The function of the bundling machine (baler) is to make the plastic belt cling to the surface of the bundled parts, so as to ensure that the packages will not be scattered because of weak binding during transportation and storage, and at the same time, they should also be tied neatly and beautifully.
1. Unwinding tension: a clamp head rises to clamp the plastic belt head, the belt pulley reverses the belt, returns the excess plastic belt to the storage box, and tightens the bundles. Then, the manipulator clamps the plastic belt and further tightens the package to the adjusted tightness.
2. cutting tape bonding: the guide plate withdraws from the middle of the two layers of plastic belt, at the same time, the electric ironing head is synchronously inserted between the two layers of plastic belt, then the two clamps rise to clamp the other end of the plastic belt, the cutter cuts the belt, and pushes the lead toward the ironing head to come into contact with it and melts (the surface), then the electric ironing head withdraws quickly, and the cutter continues to rise to press the two layers of plastic tape with the surface of the pressure plate and cool and solidify. Two-belt bonding (YKM- WY machine does not have a perm, start friction to complete bonding).
3. Unpacking: the bearing plate withdraws from the bound plastic belt ring, and each chuck is reset to complete the binding.
4. Belt conveyor: the conveyor pulley is turning to send the plastic belt from the storage box into the track, ready for the next binding.
5. Uninstall. The above is the process of single-channel bundling, when the machine is in a continuous state, after the belt is delivered, it will directly enter the unstrapping and tensioning procedure, and proceed continuously according to the above-mentioned procedure.
The packing object is basically in the middle of the carton binding machine, first the right acrosome rises, the front end of the belt is pressed, the belt is tightened and tied on the object, and then the left acrosome rises, pressing the appropriate position of the lower belt, the heating sheet extends into the middle of the two belts, the middle top knife rises, cuts the belt, and finally sends the next bundle of straps in place to complete a working cycle.
The work flow of the binding machine: the belt is sent in place → receives the binding signal → brake is released, the main motor starts →, the right top knife rises, holds the right belt at the skateboard, the → “T” guide plate retreats, the → approach switch induces the withdrawal probe → main motor to stop, the brake absorbs the → strapping machine to pull back the main motor, the → belt is tightened and tied on the object for 0.35 seconds, the → main motor starts again, and the brake absorbs the → large pendulum rod for the second time. Tighten the belt → left acrosome rise, press the lower belt → heating piece into the middle of the two belts, the top knife rises in the middle of the two belts, cut off the top knife in the →, the top knife in the → rises again, so that the two belts firmly glue the top knife in the → again, the left and right top knives drop at the same time, the → heating plate resets, the → skateboard reverses, the → “T” guide plate resets the → proximity switch induces the feed belt probe → belt feed motor to start. Drive the belt feed belt → large swing bar reset → belt in place, take the lead on the “T” guide plate → proximity switch induces the double probe → main motor to stop, brake suction → binding machine to complete a working cycle.
Brief introduction of Winding Machine
Winding machine can be divided into pallet winding machine, non-pallet winding machine, horizontal winding machine and so on. 1. T series-pallet winding machine:
It refers to the equipment that rotates the pallet goods through the rotation of the turntable, and then realizes the winding and wrapping of the goods. It is suitable for the packaging of goods shipped by pallets (such as container transportation of bulk goods and packing of bulk pallets, etc.), and is widely used in glass products, hardware tools, electronic and electrical appliances, paper, ceramics, chemical, food, beverage, building materials and other industries. It can improve the logistics efficiency and reduce the loss in the process of shipment. It has the advantages of dustproof, moistureproof, reducing packaging cost and so on.
2. R series-cantilever winding machine:
It refers to the equipment that wraps and wraps the goods by rotating the cantilever that can rotate around the goods. All T series packable goods can be wrapped with R series equipment. In addition, the rotating packaging mode is more suitable for the packaging of lighter, higher and unstable products or overweight goods. The installation mode of the machine is flexible, can be placed on the wall, can also be fixed by bracket, and can be connected with the transmission line according to the needs to meet the needs of assembly line operation.
3. H Series-Ring Winding Machine:
It refers to the equipment that wraps the ring part of the ring goods through the film feeding device running around the circular track. It is used in tire, bearing, strip, copper, cable and other industries. It can improve the packaging efficiency and has the advantages of dustproof, moistureproof, reducing packaging cost and so on.
4. Y series-cylindrical axial winding machine:
It means that when the turntable rotates to drive the whole rotation of cylindrical goods, it is suitable for the sealed packaging of all kinds of cylindrical goods, and is used in papermaking, cord fabric, non-woven fabric and other industries. It can improve the logistics efficiency, reduce the loss in the process of shipment, and has a good isolation effect of dust and moisture.
5. W series-cylindrical radial winding machine:
It refers to the packaging equipment which rotates the reel-shaped goods through two power rollers on the turntable so as to realize the winding and wrapping of the radial cylinder surface. It is suitable for spiral wrapping on the round surface of drum-shaped objects, and it is used in papermaking, cord fabric, non-woven fabric and other industries. It can improve the logistics efficiency, reduce the loss in the process of shipment, and has the advantages of dustproof, moisture-proof, reducing packaging cost and so on.
6. S series-horizontal winding machine:
It refers to the rotational motion around the goods moving at a horizontal and uniform speed through the rotary arm system. Used in plastic profiles, aluminum, plates, pipes, dyed fabrics and other industries.
7. NT series-non-pallet winding machine:
It refers to the equipment which drives the rotation of the goods through the rotation of the turntable so as to realize the winding and wrapping of the goods. It is suitable for the packaging of one or more small size goods. Used in clothing, electrical appliances, chemical fiber and other industries. It can improve the packaging efficiency, reduce the loss in the process of shipment, and has the advantages of dustproof, moisture-proof, reducing packaging cost and so on. 1. The running structure of the winding machine is stable.
two。 Digital electronic control loop, high stability, long life, low failure rate.
3. Start and stop the device slowly to prevent the upper packing from falling.
4. Touch screen, easy to operate.
5. The number of packaging layers at the upper and lower ends can be set by entering data.
[1] wrapping machine is also known as winding packaging machine, winding machine. in order to meet the packaging requirements of goods containerized storage, transportation and mechanized loading and unloading operations, a series of products of pallet winding machine, pressure-top resistance winding machine and pre-drawing automatic film winding machine are designed and manufactured. It is widely used in the assembly cost of foreign trade exports, food and beverage, irrigation, papermaking, dyes, plastic chemicals, glass ceramics, mechanical and electrical castings and other products.
The working principle of the winding machine is to place the wound object in the center of the turntable, start the turntable motor to rotate, and naturally drive the turntable to rotate, so that the object can realize the peripheral winding film machine. At the same time, the lift motor also starts, driving the whole assembly of the winding and binding machine to move up and down to achieve the winding in the height direction of the object, which realizes the winding packaging of the whole appearance of the object. This is not only conducive to the packaging requirements of goods storage, transportation and mechanized loading and unloading operations, but also prevent the damage of goods in the handling process, play the role of dustproof, moisture-proof and cleaning, but also reduce production costs and improve production efficiency. In the winding process, the main thing is to adjust the tension of the film and penetrate the film. Generally, the degree of film tension can be achieved by adjusting the speed of the turntable and the speed of the motor. As long as you know that the rotating speed of the turntable is greater than the speed of the motor, the tighter the film will be, and the looser the principle is, it is not difficult to operate.
How does the wire harness winding machine AT-101 work? How does it drive? Guys, help! Thank you!
It is controlled by single-chip microcomputer, the driving power is a stepper motor, and the speed can be set. The motor is driven by a tooth belt to drive an open turntable, the tape is fixed on the turntable, the tape rotates, the wire harness is fixed, and the winding is carried out by manual dragging. Tape cutting is also done by hand. The latest model has installed a plexiglass shield on the rotating body, which is very beautiful.
Working principle of heating wire winding machine
The winding object is placed in the middle of the turntable, and the turntable motor is started to roll, which naturally drives the turntable to roll, so that the object completes the outer winding film machine. The working principle of the heating wire winding machine is to place the wound object in the middle of the turntable, start the turntable motor rolling, naturally drive the turntable rolling, so that the object completes the peripheral winding film machine, winding machine, widely used in foreign trade exports, food and beverages, plastic chemicals, glass ceramics, mechanical and electrical castings and other products assembly cost, can prevent the damage of goods in the handling process, and play the role of dust-proof, moisture-proof and cleaning.
This is the end of the introduction of the video and instruction manual on the working principle of the winding machine. I wonder if you have found the information you need? If you want to know more about this, remember to collect and follow this site.